Click for JetForums Click for Westport Click for Glendinning Click for Abeking Click for Northern Lights

Transducer Won’t Read Through Hull

Discussion in 'Electronics' started by DOCKMASTER, Jun 30, 2023.

Page 2 of 2
  1. DOCKMASTER, Jul 31, 2023
    #21
    DOCKMASTER

    DOCKMASTER Senior Member

    Joined:
    Feb 26, 2012
    Messages:
    1,503
    Location:
    Ketchikan, Alaska
    Mine is a smaller 430DL. I was curious how far aft you put it. I think my current location is too far forward so will likely move it aft when the hole saw comes goes to work.
  2. Capt J, Jul 31, 2023
    #22
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,540
    Location:
    Fort Lauderdale
    Test it inside of the hull in a ziploc full of water, it will shoot through, I see lots of people install them slightly right of the pad starboard side.......
  3. DOCKMASTER, Aug 1, 2023
    #23
    DOCKMASTER

    DOCKMASTER Senior Member

    Joined:
    Feb 26, 2012
    Messages:
    1,503
    Location:
    Ketchikan, Alaska
    Hard to get to much of the hull due to subfloor. I’ll see what I can reach with the xducer in a bag of water before I order a new unit and punch a hole.
  4. CaboFly, Aug 4, 2023
    #24
    CaboFly

    CaboFly Member

    Joined:
    Aug 24, 2018
    Messages:
    270
    Location:
    Seattle
    Not sure in a bag it can read thru coring. Finding space for ducer and not to sit flat just stbd and with access is the challenge. But if you can a B60 is perfect for that boat.
  5. Capt J, Aug 4, 2023
    #25
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,540
    Location:
    Fort Lauderdale
    I've seen them mounted dry on a blob of silicone attached to the hull and read just fine up to 50 mph.
  6. MBevins, Aug 4, 2023
    #26
    MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,227
    Location:
    Windsor On. Canada
    Yes but not through a cored hull.
  7. Capt J, Aug 5, 2023
    #27
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,540
    Location:
    Fort Lauderdale
    True.
  8. DOCKMASTER, Aug 7, 2023
    #28
    DOCKMASTER

    DOCKMASTER Senior Member

    Joined:
    Feb 26, 2012
    Messages:
    1,503
    Location:
    Ketchikan, Alaska
    I will likely go with a B60 and install it this winter after our short season ends. It just seems like a better option and something that will be more reliable. Even when the current Xducer I have was reading thru the hull on the previous boat it wasn't super reliable. And at one point the liquid leaked out and it quit reading until the mount was sealed up again and re-filled. The B60 avoids all that.
Page 2 of 2