No EGT probe+gauge on the OP engines. Unless retrofitted, which is a possibility I toyed with also for my boat, because it's sufficient to remove...
Well, better into your engines rather than mine, anyway! :confused: @Pascal: couldn't you connect the pumps to the g/box PTOs instead? Or are...
Yeah, Reggie tried just about all tricks he dreamed of, including the use of l/h prop on single engine boats, as you can see in this video of my...
Yup, typo aside, I didn't expect a boat like yours to have inward spinning props. When I said that the other way round can be found on some very...
I would think that with a defective solenoid you should be able to trim the drive only up or only down, but if it works well both ways and the...
Well, if you neither touched the pump relais nor the solenoids, I can't imagine how they could be the culprit, assuming that everything worked...
You mean that the Arneson drives are going down rather than up when you trim up and viceversa, I suppose? If by operating the trim you would...
Typo, sorry. Now corrected in the original post. Inward rotating props are pretty popular on very fast boats, anyway. PS: what would have that...
Did you check upstream or downstream of the holding tank? Since you mention valve rather than valveS, I guess the latter. But I half remember that...
Neither have I, particularly on the outboard side of the leading edge - assuming outward rotating props, obviously. But the good news is that the...
Great choice, you won't regret it. Out of curiosity, are you possibly aware of the price difference between the pro and non-pro versions? I like...
Whoa! You mean cutting the deck I suppose - or is it really the hull?!? :eek:
I already told you I can't, for the very simple reason that commenting without knowing ain't my habit. I appreciate that you might find this...
'Salright. I don't buy your and CJ's armchair speculations either - fair and square.
Yeah, right. I had in mind that both SL and Hatt were established around the same period, and google just confirmed that. Actually, SL in '58 vs....
This thread should be pulled, because it's humiliating all of us with human boats. Not later than yesterday, I was crawling into a corner of my...
You should rather ask yourself. If you re-check this post in the nose cone thread, you will see that I only mentioned the master cabin placement...
Pardon? I just quoted what you wrote.
You know, as far as I can tell from the photos, I wouldn't actually call those design completely different. OK, your "office" doesn't have trim...
Not trying to shoot anyone. But I happen to have tried boats like yours, where the range of speed in between D and P speed is literally untenable...
