The pilot pump, when operating, does it start and stop? Likely given the persistent whine it runs continuously. To do this it must allow fluid...
Ok, whine, I think I missed that. That's the sound of hydraulic fluid being moved through restrictions. Look for check valves while researching....
Things "not going wrong" in a Marlow seems to be more the exception than the rule. I've never heard of this being the case from multiple Fleming...
Thank you for keeping this current, Ken.
Sounds like air in the lines as one possibility for noise. Another may be the helm pumps themselves allowing bypass from the pressure provided by...
In SoFla the owner has broken the law, too, for not pulling a permit.
Rules of the road are rules of the road. Doesn't matter whether or not you have a license, that is up to the point where you engage in commerce...
Do you need to seat within CAT dealership service networks to maintain the warranty? That's the issue I see here...I have a relationship with a...
Keeping the boat north of the Savanah River during hurricane season has its own significant cost benefit.
Hell, sea time is what I need all of the time....
Many do, and you need to pay them a visit and pay them a fee to be on the list. The list requires timely arrival or you'll lose your slot. I...
The pillow talk just made me laugh and recall this ad...
[MEDIA]
Give that leading edge with open wood grain facing the prevalent water flow off the deck some thought. Many shops lay in an alternate piece to...
Concur. I run 11 and burn 26. I could drop to 9.5 and cut the 26 down a third or perhaps more. Problem is the lack of load on the engines. Hence...
PM sent to you in case you close .
especially tasty atop her fresh biscuits.
Speed issues? I think the problem is maneuvering the boat with the 12" props you'll be spinning on the 3/4" shafts. You can make the boat move...
Every single hose, hose clamp, valve, fitting....and you can't just look at them. Flex the hoses, torque the clamps and watch them react. There...
So, when I did this project on my sportfish, upon installation of the new rub rails, I backed them with a 316 SS flat stock, 1 1/4" perhaps 26...
