Follow the hose from the sump box?
The Sunseeker 66' is a far superior boat than the L650 fly in every aspect. From quality to seakeeping.
Trident or Sheilds and absolutely wire bound. Corregated wire bound IF sharp bends are needed.
That's easy, register it to your tender!!! :D
The breaker for the shorepower cord "should" be accessible. Look there to see how many wires your cord is, or ie follow the cord after it leaves...
If you order the cable from Glenndenning in comes in the correct gauge and type, but you do need to confirm 3 or 4 wire. The 100' is a little...
They come in 75' and 100' lengths, you can always shorten a 100' cord to make it fit and it's only $100 or so dollars for the longer cord. Viking...
Send me a private message with contact info. I am located in Pompano Beach,FL which is quite a ways away from Morehead City. But I could get it...
I just did that if 18' of water in the ocean off of miami, except had to find a 110lb anchor, 30' of chain and like 15' of rope, took hours going...
There is a ship that loads in the Northeast once or twice a year and then will ship to Ensenada, I think its Sevenstar. I could run it down from...
That's the problem with hydraulic.
I honestly don't think there is another way. I recently recovered a 110lb anchor with 25' of 1/2" chain. It was near impossible for 2 of us to...
If the Westerbroke runs fine, then just run it till it breaks, oil samples who cares....... Phazor makes the closest footprint to most...
Mans would be my first choice and the best choice. Nobody does the 1000hr service every 3 years unless you're actually doing 1000 hrs. More like...
I would leave it, BUT what changed to gain 80 rpms? Also what was your fuel and water load?
Yes, those are the same motors as the 1550's. But not sure which tech you'd ever find to flash them.
Very nice!!!!!!!!!
You do realize their headquarters are in Miramar,FL right? 954-435-5999. I do think Ingham marine works on them but not certain. I also would...
No they are not. Repairs on Detroits are just as expensive and finding parts is even harder. I had to jump through a bunch of hoops to find the...
THIS, I would never heat one in the water. And no, they don't last forever.
