Every one I've seen has to come out on the inside of the boat which means any trim that overlaps the glass will have to be removed. I think mine...
Same as everybody else who owns an older post. Keep the bow light and the tabs up in any kind of following sea and you can manage fine . If we're...
We like the 46' . We have a 1993 that we've put a few thousand miles on and it suits our needs fine about 99% of the time. We travel with another...
Yes, no comparison. The only reason I mentioned this was because he asked about the 8v 92 mechanical engines.
No, it's a 6v92TA.
There's no shortage of parts for mechanical 92 series engines. I rebuilt one last winter and plan to do the other one early next year. I don't...
It's in Panama City but I travel a lot so if someone wants it I can probably get it close to them if they're on the east coast.
I have a Sanyo ASW 36NP washer that came in a 1993 46' post. It worked the last time I used it but we need the space more than we need the washing...
In the nineties we had a Boaters World and 3 West Marine stones within a 5 mile drive in addition to our locally owned supply houses. Now we have...
The rack is controlled by the governor. The modulator keeps the rack from going to full fuel until boost pressure is adequate to burn the fuel...
Yes, the 93 - 46' is set up the same way. Is it possible someone ran the racks and set the fuel modulators ( if equipped) incorrectly? They can...
I never understood why they don't open until 9:00 . Most boat people have done a half days work and found what we needed somewhere else for less...
You say the props look good but what do they feel like? If the feel like 40 grit sandpaper or worse, that will rob a lo of RPMs.
My door is wide enough to get an engine block through. I don't remember the dimensions but I know it will fit.
Give me the make and model and I'll see if my friend can quote you some duplex ss parts.
Do you know the diameter and pitch of the wheels?
No, I'm familiar with Sidepower, this was Sideshift.
I don't know anything about them but I saw a new installation of a "Sideshift " thruster for smaller boats that doesn't require drilling a hole...
I don't have this turbocharger.
The numbers you posted appear to be Detroit numbers . Can you get the number off the turbo? I may possibly have something in my boneyard. Is this...
