Thanks, yes we tried our bank, no joy. Not going to an online unless someone can step up and provide a reference.
Old thread but a current question. Selling a boat in Grenada, buyer wants the deposit (about $20K) placed with escrow. I'm in Canada, US based...
Viking makes their tanks out of fiberglass so putting the hole in it is pretty easy. I actually cut the hole a little over sized then I made an...
This is an item number for a sender on eBay. 131928908996 It's just an example, that one has a threaded mount but they are available with 5 screws...
What I did was purchased a new sending unit , installed it in the top of the tank. Think holesaw. Then I used the wires from the "do not flush"...
Old one is configured for 230vac primary.
Besides asking him for a quote to do it. That technology has been around for a while
I don't think you're talking about the crankcase vents sounds like the air intake at the turbo. I'll look for a picture of the crankcase vent.
These vents are to relieve crankcase pressure so the filter is only to stop oil mist and the like from entering the engine space. I suspect you...
Yes b Yes..but..if you're putting the 92's in because you can get them and not because of the bump. Wouldn't it be a lot easier to just rebuild...
Did you see the guy standing at the end, that's perspective. This thing is huge.
I simply gave you the reason why a Piston with a hole in it allows fuel into the oil. I'm not on your boat nor seen your mess in person so as to...
Contact whoever you're buying the new prop from , they'll have a supplier of shafts that will have the dimensions.
You kep't sending fuel into the cylinder with a hole in the Piston, it can't reach compression so the fuel doesn't burn but passes through the...
That harbor is pretty small and with pretty well closed access from the road. I'm suspecting there's more to this. But I doubt anymore will be...
LP was actually pretty prevalent in the 80s and early 90s. There were garages around that did nothing but conversions to LP. A lot of commercial...
Death is such a questionable thing.
Ralph That's what I've been preaching since this started. Big mistake by not looking at the other engine .
Remember what I said in the other thread. You need to pull the head on the other engine and have the valves properly inspected. Hell, once the...
What is the life expectancy of blue hose. I have a short hose with formed elbow on my 6-71 that J&T custom made for their conversions. Of course...
