Ok update. Its finished. I installed the rebuilt rams. Everything works perfectly now. One questions, I put one of the avoids on upside down. So...
I worked on it today. I matched the extra cylinders I have up and they are correct. I’ve pulled them both apart. Just waiting on two o ring kits....
Am I missing something... there’s two solenoids correct? When they get 12 volts the contacts close (touch) and the hydraulic pump spins. I’m...
The boat is kept on a lift 100%. Salt water. I don’t see any corrosion or electrolysis, but the anode might be getting in the way. I did ask the...
Also the plastic cap on the hydraulic tilt tank cracked. Could that be because the air sucked in caused a build up in pressure?? Thanks
hey guys, I’m helping another friend with his 2005 Sea Ray 260. Mercruiser bravo 3 The stern drive is all the way up now. When I try to trim...
Changed the port side fuel pump. Holding the rod up to get the bolts lined up is hard. I ended up using a lot of grease to keep it in place. I...
Yes, I started both motors after the oil change. The guy even took it on a few hour trip and said it ran great. He never goes into high rpms. I...
hey guys, I’m new here. I don’t normally work on big boats. I helped a guy out for free. He has a 1988 34 Sea Ray with carbed 454 mercs. One...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")