A friend of mine had another brand of gyro's put into a sportfish, they did all of the calculations all of this stuff, they promised a certain...
No, Marine Tex gets hard but I think it still has enough flex that cracking shouldn't be an issue. You mix the resin with hardener and then the...
By the way, say the name out loud.....Cialis...…ie Sea Alice..LOLOLOLOLOL
Yacht is pretty rough. It is owned by one famous owner. I don't think you could say it's a party yacht as I've only heard it was around 6 guests...
Just mix up resin and micro ballons and seal all of the holes, re-drill, and put new screws with 5200 to bed them. Marine-tex would work as well...
I'm not a pilot, but on many commercial flights I feel and hear the pilot use the reversers on landing.
The USCG will tow when there are no commercial towing services in the area.
I've never even heard of Miami Air and live in Fort Lauderdale. Looks like they overshot the runway a little bit. But could have been much...
A loss of steering or engine controls could disable it.
Cukote works very very well in south Florida also.
You could. Also putting a 8 ounce bottle of cayenne pepper works good as well. Copper could cause color change in black and you,d see green on the...
70’ is way too big for owner/operator especially with an inexperienced deckhand. I don’t even know WHY anyone would want to do that. It’s...
2002s were effected by Gelcoat issues. My customers is just slightly older and they were all fixed and awlgripped in the early 2000s and haven’t...
I have a customer with a 50’ post with mans and they have over 6,000 hours and have never been overhauled and still run great. Boat cruises at 27...
For boats that cruise under 20 knots, I’ve always had really good results with trilux white. Norseman, I think you put it on too thick
The spreaders (shape and look) should tell you who the manufacturer was by looking at them. Lee’s and Rupp’s spreaders have distinctive design...
Granted you're dealing with larger generators and larger impellors. Most of the generators I'm dealing with are in the 10-25 kw range and tend to...
I change gensets annually or about every 100 hours if they've been sitting a while. I'll go 200 hours if we're on a trip and the hours are being...
Make sure whatever glycol you're using doesn't eat copper as well as whatever fittings you're using to tie it all together. They use rubber hose...
I worked on a 97' MY steel with a canoe stern back in 2003, same owners still since 1987, same Captain since about 1995 who started out as a...
