These 3406's calculated fuel burn off of a basic map based on ,RPM, injector pulse, and load. Chances are the old props might have been a little...
Aside from the 48', Burger builds on order. So if anyone wanted a yacht with the old lines, they would have ordered one, but nobody has.
The entire problem with Burger is that they've been trying to build Aluminum boats for way too long in a size range and era that wants fiberglass....
He's looking for 2300 rpm's loaded. Motors are doing 1415 and 2370 with no load. I would verify the tachs are correct.
I would replace the hoses as they are old age wise and are they going to last another 10-15 years, and I would do exhaust risers for both engines....
I would've taken out more pitch and would've wanted to be closer to 2350 than 2300. They took out less than an inch. Usually it's an inch of...
Patch them and use them for target practice......or floats for when you're swimming......LOL
I have had excellent performance from the Taylor brand of the RIB material fenders. Taylor calls them superyacht fenders. I wouldn't hesitate to...
Westerbekes were very popular in the 90's. But several of their issues, caused them to be very disliked. Some models the heat exchanger is part...
Jabsco does make a continuous duty blower with a 5,000 hour motor life rating. BUT, I don't think they make it in 32 volts. 35770-0092 (12 volt)...
Probably not, the inflatable fenders take a ton of abuse (a lot more than RIBS) and will probably blow the seams you repaired. You could try...
I've had the same issue on a 2007 Kohler 12 EFOZD for the past 7 years. We've replaced fuel lines, fuel pump, circuit board, and many other things...
I've had to buy a 12 volt or 24 volt complete blower assembly and then replace the motor with the 32 volt motor that Capt. Ralph mentioned. I...
You have to replace the part on the bottom of the hull every 7-10 years as they do wear out.
About ten years ago, I had the same issues fighting with Azimut North America to try to cover items that were supposed to be under warranty. I...
It has always been recommended to shut off the charger when starting the machinery for the voltage drop/spike etc. reason. But a lot of yachts...
This is a bit different. I don't know about Westport so I cannot comment on that. But neither Viking nor Hatteras factory service center is the...
I find it extremely strange that both pods started leaking oil at the same time. Where you in very shallow water and kicking up a lot of silt or...
How long has it been since you used it the previous time and ran everything? Either everything was sitting without use for a long time and the...
When it comes to chargers, of all of the retailers in Fort Lauderdale. Wards has by far, the largest selection of battery chargers in stock.
