I'd be looking at the Sunseeker Manhattan. The 55' Princess fly would also meet your needs at a higher price point and my preference would still...
Alexseal is a 2 part Eurethane but from what I've seen, never cures as hard as Awlgrip or Awlcraft and therefore is less abrasion resistant. It...
What are your top 5 needs and top 5 would be nice to have's in a 50' MY?
Normally you would put teak right over that, for 2 reasons so any water flow off the side decks hits the fiberglass as usual instead of hammering...
What I am trying to explain is due to the length of your runs, slightly larger I.D. pipe would give you a little less restriction over many feet...
Pacblue, Thank you for clarifying that for everyone. I recently delivered a 2007 40' Cabo flybridge with 800 Man's which made me think they were...
PM Pascal, the grove is his home turf and I'm sure he knows someone down there.
3" hose is 3" I.D. not O.D., stepping up the size of your hard piping to 3" I.D. , even if you keep the 2.5" seacock will still increase water...
What I am telling you is the 800 MAN common rails that Cabo put into their boats in the era that this boat was built burned 62 GPH at 80% for the...
The 47' Cabo was too old to be built with C18's, the 48' is a different boat with a slightly different hull design and was first produced in 2003...
Yes, 3" is what I always see on C18's, even the 1000 HP.
The CATS are 2.5 knots faster at cruise and WOT. And, 1100 MANs would be 2.5 knots faster than the cats at 86 GPH at 80%. The C18's are 1000 HP,...
The 48' Cabo is a much better riding boat than the 47', the 47' had too much weight forward and tended to pound a little and was a little wet....
Rick, I'd highly recommend Awlgrip or Awlcraft over Alexseal for a cockpit. Alexseal is pretty soft and scratches easier IMO. Also, you want to...
Check your shorepower wiring connections from the cable to where it attaches in the boat and at the back of the breakers. I've seen many that...
He most likely just does bottom fishing in 40-50' of water. Prestige and very good quality do not go hand in hand. I've put a lot of miles on...
You can do ALL of the due diligence you want, but without walking on the particular boat and seeing it in person, most people won't make a...
For many, yes. Many are not sure of either the exact brand or boat they want, or are sort of sure but need to see it in person and compare it to...
Like the boat in this link? If so, they'd put teak right on top and it would look just fine just like any SF. These are the same gunnels as on...
Scrape it off and glue the new one in it's place. I usually use 3M weatherstrip adhesive. Boat owners warehouse sells all sorts of gasket...
