That's the same way the 75' I did the Loop on was set up.
Hatteras is only building MY's in that size and their engine rooms have a lot more ceiling height above the engines and room behind them. Viking...
I don't know about their hose clamps. But can whole heartedly recommend AWAB and then ABA second. Both are extremely high quality.
Mine was the same way as yours, but the hinge is along that crease where above the S/S hand rails and lowered fine and we had plenty of air draft...
The MAN engines themselves do not have zincs, internally and never have.
None of the MAN's have zincs, they usually separate the metals with saltwater in them via O-rings or other non metallic materials. Maybe the new...
I'm guessing he's going with 3412's because he found a used set. I'd highly consider going with 1000/1150 HP Cat C18's over 3412's......both are...
It's neither. These are the only zincs for the entire vessel (aside from swim plaforms which only zinc the platform). So the entire vessels...
The boat in the Picture is a 2018 62' Princess with Cat C 12.9's (but that is a Fiat/Ivesco motor). Their 55' and 62' with Mans also have the...
Rudders and shafts are all tied into those zincs via the bonding wires, so no need to bond them individually.
There are always two zincs. Tell me this giant zinc hanging down doesn’t slow the vessel down on plane? [ATTACH]
Yes, they are. However, how much zinc protection do you need on plane? You're away from any marina and any other boat and you have billions of...
It's more than 2 boats. No, Man's and Cat's. They''re the only 2 zincs on the entire boat, aside from bow thruster. I'll try to find a picture...
The wires on the Hatteras I ran had plenty of slack in them. We rested the arch on padded plastic adjustable Rubbermaid saw horses, was really...
I understand that. But you're only on plane a smidgeon of the time and how much electrolysis could you possibly have on generator for a day?...
Is the entire arch on hinges where it meets the boat? If so, it's relatively easy to lower the whole arch. But will most likely have to remove...
All of the late model Princess' and Sunseekers I've seen in the last few years have these giant zincs (usually 2) mounted right on the running...
If you don't have a bonding wire going to the rudders inside of the boat, then yes, you should have rudder zincs.
ENOUGH with the bickering. The effect of a GLOBAL virus on a GLOBAL industry (Marine Industry) has absolutely NOTHING to do with Politics. The...
I used adjustable plastic saw horses. Rubber maid ones I think. they worked perfectly. Really it's just resting there. I lowered everything in...
