Well that’s the problem. You need to make sure the drains will drain underway with the bow higher than at rest also the issue with multiple...
I never understood the appeal of what’sapp. It seems very popular with people from ... let’s say 3rd world... but nowadays with Wifi calling,...
You can’t drill 5200. Full the holes with marinetex or thickened epoxy, let it cure and drill again. Or if the holes aren’t way too big screw the...
Looks real good are the white rubber hoses condensate drains in some of the pictures? They don’t seem to have much slope. Sooner or later they...
I m pretty sure is a pretty recent judging by the list and weight distribution change. It came up pretty suddenly so I don’t think it s been an...
In our case there is triangular patch, like a reinforcement on the bottom of the tube at the end. The leading edge of that patch has come unglued...
Sounds crazy... right? Walker Bay generation 450, 3 years old During this past trip to the Exumas I noticed it has developed a fairly...
You all realize this is 12 year old post, right?
As usual... the only winners is this pathetic stories will be the lawyers.
Nice one. The critical element of ladder safety are the grab rails extending way above the floor as mentioned earlier
Because with ladders you have to go down facing the ladder holding with both hands. Stairs provide a glass of security and fiberglass is the...
yet you get a lot of soot on the transom ? Black smoke on acceleration, how quickly (how many seconds) do you take to go from 1000 to say...
Spin up time is often mentioned as a downside of gyros but in the real world does anyone really hop on, gets under way and reach rough water...
When you get into the “slightly” range it s all very subjective. The only way to get a valid result would be to have two identical boats, anchored...
There is reason maintenance intervals are given by hours or gallons burned which ever comes first on many motors. The faster you go, the more fuel...
Obvious typo in my reply. I mean You CAN NOT compare ..
probably because so many boats do do more than 100 hours a year
What s the WOT? With 2300 rpm motors I like to run no higher than 1900 assuming the boat isn’t underpowered and remained fully on plane. make...
I never run any engine over 70%. The guys telling you they re designed to be run at high load are not the ones paying the bills and are usually...
You can compare a cold molded boat to a wooden boat. Completely different. A cold molded hull is closer to a fiberglass hull except that the glass...
