Aside from checking your return fuel line. Check/change your vent hose and make sure the vent is clear. If both hoses are origional, change them.
You need to take the cable that's going from the port throttle to the glenndenning and go straight to the engine with it (may require a new longer...
It's a Florida thing. I don't like it either, but most owners expect it.
Check your fuel tank return lines.
Bottom paint.....can even use bottom paint in the spray can......first see what drill bit size is just a touch smaller than the holes.....As...
What boat are we talking about? I've used them before, you do lose some power shooting through the hull, but if they're in the right location...
First you have to drain the fuel!!!!! The saddles gravity feed into the center, and I don't think (can't remember) if they have valves to shut...
Fuel tank is bad. Center tank always is the first to go, between being really close to bilge water, any water/condensation in the saddles always...
WHERE is it leaking from and what seals do you need? Model and serial number would help. Emailing a Kohler dealer would be your best bet.
He didn't. He likes doing "cutlass bearings the hard way" rather than freezing them for several hours so they contract.
How much is your time worth? LOLOLOL. I bet that machine shop would've pressed out the old cutlass bearings and new ones in pretty fast and...
The key is having the fish box (and lid) well insulated. IN that situation the ice makers are great when installed properly.
Pull and Inspect the shafts. Put the Cutlass bearings in the freezer for a while.....then install.......
Generally they should leak out the weep holes when they fail and not in the crankcase, but if it severely ate the bearings, it's possible it could...
I ran a boat that had the first generation. Owner had the boat for about 8 years and it still looked perfect. Owner's mate used the cleaners...
It's a shame what happened at Southport marina. The good news is it does look like all of them are still floating. I prefer to be in the...
Really, so many factors change in 5 years, that it's somewhat futile to narrow down price and what's available now at that price. I would go to...
Generally Sportfish have the galley in the front of the salon because the front of the house has no windows, so it's a perfect place to put the...
I'd go with Flexi teak. It's been out forever and has a good track record. If simply cleaned with the right products, it lasts. It does get...
??? They just did by building the larger locks, next to the old ones. With modern medicine and machines, all else that would be needed is to dig...
