Yes, but the overhaul is done in place. That is required by MTU given the age, if you look at the owners manual, and they're close enough on...
Pascals boat IS a 53' MY and the 58' yachtfish is the same from aft deck forward.
I am a fan of wearing masks, but I don't see the need or reason to wear on IF you're outdoors and 6' away or more from the nearest person. So...
Both are great engines. Man's will be faster, quieter, and a touch more fuel efficient. Cat's more low end torque, simpler motor, but have to...
WHat was the reason the entire short block was replaced on the other engine? Was it water intrusion that caused the motor to hydrolock and split...
I agree, if it gets diluted in a pocket, better to have the extra protection.
Did the engines make WOT rpm? If so, Just find a propeller curve chart for those engines and the RPM and fuel burn will be on there. To be...
Guess it is wood, after all. Wow.
Sounds correct, but depends on current.......But at each RPM level should burn that I'd guess.
No way, I am almost certain it's fiberglass and most likely has a vinyl wrap on the hull. Look at how the swim platform is a molded part of the...
It seems the USCG Miami station has a real hard on for enforcing the illegal charters, meanwhile USCG Fort Lauderdale you never hear of doing...
It was a 62' Predator with a very tall hull, rub rail to waterline is almost 8' I would guess. It was $24k including everything at the time 2014,...
The boat I mentioned in midnight blue origionally had gelcoat in that color. I'd have to have it waxed every 3-4 months. At 7 years old, we had...
Yes, hotel closed, small part of hotel knocked down......restaurants closed.......marina is intact and the same as is the marina parking...
Use that RULE slim line submersible electric pump, they're around $100 for the 500 gph version and work very well. I use them for transferring...
I paid $12k to do that job on a 58' Azimut about 5 years ago. To pull exhaust manifolds and install new gaskets, we were only leaking exhaust so...
I think it could be done. Cut plate and crane it off of one level, pull out cars with a magnet like they do at the scrap yard, weld the side back...
Sunseeker would be the better quality of the bunch, by a good margin.
The 64' does have steps both to the interior and the aft deck. I do not remember what the 63' had.
Or, perhaps because both people are needed?
