Judging from the video, it is a VERY moderate beam sea......2' maybe.......to have a 70' MY do that, yes I would call it that. A 75' Hatteras MY...
Volvo bought Seven Marine in the focus of mounting a 300-350HP diesel to the mid-section and lower unit of the Seven Marine outboard. They...
In all my years, I have NEVER had to replace a generator from being under loaded. Never had one live a short lifespan due to load. Here in South...
No load RPM is always higher than loaded rpm. I'm pretty sure your engines are supposed to make 2350 rpms with a load WOT. They're very good...
Looks like your engine has the small injectors......or they were derated at some point in time.....most of the 8v71 TI's I've seen have the N110...
I believe you have the Nylon ones and they're just driven in, give them a call and verify, but like this CYLINDER PINS - Insta-Trim Boat Levelers...
THIS
I forget, I had boat levelers many years ago. But was easy to change in the water on my boat at the time....., connect the hose first before...
RUN from Jefferson.....Marquis is ok, typical Carver quality......nothing to write home about....usually they're slow for their power/size......
The newer gens with computer controlling can handle the lighter loads with no issues. Every yacht I've run that had a smaller gen, it NEVER got...
1. Up to around 2012 on OA. I thought the layout was very good, woodwork and interior well built. Outside had a lot of cheesy latches and things...
With a seakeeper you don't have any additional protrusions in the hull. No fins sticking down to get wacked, or fishing lines caught around or...
Holy Cow does that thing rock and roll in a very very moderate sea without stabilization. What a mess.
That's not true. I once ran a 62' Predator to Bimini for the day. We docked bow in and 90% of the boat was in the slip. The tide came up to...
Fix injectors first. Boat levelers can usually be changed in the water by a diver since they have external hoses.
I agree with Pascal here. On all of the European boats that I run, English included, boarding is never a thought in the design for the American...
You are WAY over-propped. You need to see 350 more rpms at WOT. Is the bottom clean? If yes, it sounds like you either have a serious HP issue,...
Heat breaks down locktite ( from a torch), but be VERY careful as not to create a fire.
I notice that they help with stability and lift also......
Yes many times with the sidepower curved fins on a 66' Manhattan....they were mounted in the engine room forward. Never heard them inside the...
