The delta 80 shows that it s not about being obsessed with classic looks but that modern can be gorgeous as well again it s about proportions...
No. I would not. And that isn’t limited to boats but includes cars as well. aesthetics are important to me and Proportions have to be right....
One thing though... if using these for generators make sure They have holes on the back side so pressure can’t build up under way. And make sure...
Replacement pump depends on what you have right now. Most quality boats over 50/55 typically use a Headhunter Mach 5 120 or 240v These pumps...
good idea. Whoever pulled the shaft should have checked that the strut is lined up correctly. I had this issue on my boat when we repowered....
There is just no way that overfilling the fresh water tank could result in a toilet overflowing. Makes no sense. when asking technical...
Indeed the bigger the strainer the better even if that mean using bushings to fit the smaller hoses. another option is to fit mesh strainer thru...
It’s been about 8 or 10 years since I ve been up there. Annapolis obviously. You re too big for moorings but I ve anchored there off the naval...
Each pump and chiller has its own breaker inside the cruisair cabinet. For some reason Cruisair set up the whole thing to be fed by only two...
Indeed control delays can be a real pain in the butt. In a tight slip, once you re in the boat has nowhere to go so I m not a stern thruster...
With a chiller system air temp readings at the air handler isn’t that important as it is completely dependent on the chilled water temp. to...
Thread title is chiller troubleshooting... so obviously talking about a chiller system. Not remote condensers
That s insane. How can hull shape cause this.
I replaced the breaker last week...
Laugh if you want but we are still living in a (somewhat) free society and allowed to express opinions. I also applaud any manufacturer that...
What boat was that? That would mean never being able to plane on Biscayne bay where depth average 10’ at low tide.
I ve been thinking about setting up a 5 gal shop vac, with a manifold and hoses permanently routed to various bilges. Emptying it could done with...
I pulled pump nr 1. Impeller shows some erosion and the two holes are slightly bigger than the spare shown in the picture. what I am...
No, chiller nr 1 and nr 2 are on the same breakers on the main panel and that s what’s tripping. Chiller nr 3 is on the second breaker which also...
Yes within two degrees. All three chillers are in the same shelf so no variation in water flow
