Ad to you first question about drawing vaccum thur the strainer housing, I m not sure I understand what you re trying to accomplish. With the...
Funny how the UK is home to some of the best looking cars ever made and some of the ugliest aircrafts.
I looked at a 2013 65’ a couple of months ago for a friend. After 10 minutes looking at all the issues outside he was ready to leave. that...
I leave the running gear bare and have a diver clean the bottom and gear once a month (miami, on the bay) propspeed is expensive but the problem...
that’s good... The BN2 is not bad looking... the nose on the 3 though...
The crap the diver shakes loose is so small (fitting thru the mesh) that it s no worries. I ve been using these for years on various boats and...
You don’t think a Pontiac Aztec, a carver Mariner or a BN3 Trislander are ugly? Come on... be honest. Be blunt. It feels good once in a while :)
So your goal is too make a statement passing by ... wow.
10 kts is just about the worst speed for a 40 footer Welcome to hydrodynamics 101. Hull speed. Roughly the sq root of LWL x 1.3 Exceed...
I ve instructed my diver to brush them every month.
Air runs 24/7 inches under way. I installed the same type for the mains when I repowered. No issues.
Do you really have to find the same one? Holes Should be pretty standard.
If I was switching to self contained I would look at smaller US manufacturers like Ocean Breeze, Flagship and a couple others I forget. Better...
They re also called South Bay strainers. Instead of having wide slots, they have a bronze mesh which is removable and replaceable in the water...
The MTU tech who just did the in frame on the port 16V2000 isnt too worried about it either. I just wonder how one would get nr 2 diesel in the...
Strainer basket had a small crack. It’s a plastic groco. I m ordering a new one and in the meantime used a zip tie to close the seam. next...
No DPF sulphur not reported
Had a fuel sample sent to a lab and it came back with elevated viscosity at 2.5. Acceptable is 1.3 to 2.4. Lab notes it is usually the result of...
Breaker has been holding fine till last night after returning to dock. Quickly realized that the middle coil on chiller nr 2 was much hotter than...
It s but odd for all sets of contact to fail at the same time. I can understand loosing one hot or the neutral but all 3 is odd pretty common for...
