It depends on the stages. Also the yard. Certain times of the build the yard will not allow you to inspect such as when they're laying up the...
I love my Dewalt oscillating saw. Probably THIS blade: DEWALT Bi-Metal Oscillating Tool Blade in the Oscillating Tool Accessories department at...
To sit in 1 of the 50 file folder boxes they have stacked up in their office that nobody will ever look at again!
The accidents were both a matter of incredibly poor seamanship and training and have nothing to do with any of the above. Both vessels bridges...
My post is factual and the problems facing the Navy as far as seamanship go. It is proven, with articles from the Navy all over the internet, a...
Sensors do go bad on MAN's. Depends on the era of the MAN's.......but expect to change 1 sensor (between the 2 motors) every 1-2 years. They've...
The reason I'm bringing this up is I had an issue with this very same situation, where the boat had a nice plate scribed into starboard and...
The vessel must have the official number permanently affixed in block-type Arabic numerals of not less than 3 inches in height, preceded by the...
true but they are glassed in place during the built. A metal placard with screws is not permanent as they’re easily removed.
they have severe issues and there are 2 other incidences I believe . 1 destroyer ran aground in Tokyo harbor. There are a lot of articles on it,...
there is a good man dealer near there. I’ve used them. Their rates are reasonable compared to south florida standards. Do you have mans or mtu?...
what you’re posting just does not add up. The 2000 hour service is the same as the 1000 hour service where all of the coolers are removed and...
it,s not ignorance it’s reality. A realtor lists the property to the best of his knowledge. If a buyer wants to dock a boat there, he needs to do...
And how do you permanently affixed that to a fiberglass boat??? Decals and a coat of resin is the only permanent way to affix the official...
or simply have a good plan in place. I manage 10 yachts from different insurance companies and all have accepted my plan which includes an option...
and their lies the entire problem. A fuel truck that generally fuels yachts will know where to tie up. Doubtful in San Francisco there is such a...
Yes, and I’ve been around a lot of non common rail mans and have never heard of replacing the heads.
Many marinas will discount on that type of volume, so ask marinas first, then find out where the commercial guys are filling and call there as...
You’re making this way too complicated. Clean the area with acetone. Put on the self stick numbers, put a coat of resin/hardener over it and call...
There is a reason realtors do not get involved. Unless you want to hire a surveying company (not a dock builder) to survey every foot of water...
