You mean there is another rummy wrench swinger? Must of been a cousin of mine.:D
Unlike the straight 671s, the 6V92 is a fat beast. You mentioned stb engine but which bank? If the inside bank, tearing the exhaust and head...
Never tint the main nav or bridge forward windows. Increased reduction in forward vis and lots more reflection from back (scatter) light. Mask...
Cat uses the same block for the 2.2 gen sets. Just deeper oil pan. Good oil. Good block. I would also advise to ensure the case breather is clean....
Hopefully not Frams... On the 844L block, The OhNo or NL filters are only to use. And again, a bad vendor batch of oil pump reg springs could...
I have witnessed this also, but on larger engines. AND, very long ago. Anything is possible. Any history or logs from previous captain?
Altitude is our friend.
Your looking for a Delco 30SI, 32Vdc. It's pretty common world wide.
Have you measured to oil going into the engine? Those rubber stopper dip sticks can fool you. While your waiting for those senders to come in, try...
This is good. Not good; I can not find a second oil p sender in the parts lookup. Usually there are two, one for a gauge the size of a shot...
That wire was used for an original two wire sender. No telling what vendor Cummins/Onan is using this week or if it will have one or two studs. If...
I remember reading long ago, the Hawaiian island ferries (with foils) was running out of spare foils,,, to many whale strikes.
Pick up a cheap IR temp gun. On blocks that long and involved, your going to need one in your future.
O K kiddies, My Google don't translate on the threads. You talking about that Red Head again????
Here in south coastal Ga & N/E FL, the surviving Eggs should have been burned long ago. Shame, they are good looking boats. What Mathews we see,...
(years ago) We shared Government Cut inlet with the Miami response team and companies (we had KB). It seemed that the north jetties got a lot more...
I prefer NOT to work on gas inboard boats. Other than our own 2 outboards, I prefer not to work on them. With that said, I make a living...
Obviously not like the good ole days. We used to grab tubs like this quickly. The different Gov's were happy. NPS was happy in the parks....
When in doubt, drop a volt meter over the side. Maybe a lil help here; http://www.boatzincs.com/anode_weight_calculation.html
There was an artical in the PBB Mag a while ago that discussed over propping and leaning towards operating at the peek torque curve vs...
