I'm with Skippy J on this, That was not a propeller installation issue. In the pictures the key way is perfect, no distortion of shaft material...
Next time you run, see if bubbles are coming up thru your coolant recovery bottle. Is it still your e gauge that states your getting hot? With I...
Do you have a coolant recovery bottle? This is a 6-71TIB, rite?
Lets look at it other ways; Your looking at a problem child engine that is already 12 years old. People now are nervous of it. When you sell her,...
How is your coolant level? Coolant still clean? How do you know it's over heating?
Don't forget to check out the Bosses other baby; www.JetForums.net
Perfect.
I was trying to find the words to invite you kids over to these swamps. But alas, no green anything in my pockets.
Awesome turnaround.
The small hose on top (5/15 to 3/8") is for raw water from your engine to ensure water is injected just behind the contact surfaces of the shaft...
There is not a lot of pressure against the ring. Supper flat & clean surfaces. The water acts like the sealant and lube. To much pressure; the...
Cleaning the PSS is crudely explained here; [MEDIA] The shaft log hose is the bellows refereed to. It has an spiral spring in it that keeps...
You can swap senders between the motors as a test. Or run temp wires and criss-cross the senders for that same test. Make sue the engine blocks...
Dead at the end; Not connected to anything? This may be a external feedback strap. Usually not used on Delco's. Perfect. Strange. Lets still...
The injectors are dribbling fuel into the cylinders and leaking down. That first attempt to start, the injectors are not offering that first fine...
Your warm alternator is from getting excited and doing nothing. Even draining your battery. My first guesses are the purple wire is hot when key...
Make sure that purple wire is dead with key switch off, Hot with keys witch on. This wire is your exciter wire. It helps enable the alternator at...
Their leakers.
I suspect you exchanged your injectors.
Normal. You can wipe off with a finger. Hopefully not gritty.
