Ok, she's stunning...
Threads like this....this is why I choose to run with quality and proven builders with tenure in their gallery of vessels. Then I renovate and...
I agree, but they both have good value in a world where it's becoming daily more rare to have a reliable source of information or education to a...
I had to come back to this thread after too much time on the rogues......
Looks like a Trailways bus from the 70's with the split roof plane.
Agreed. Ohm reading from the senders at the gauge can immediately educate as to an issue w sender or wire. Prove a fault or prove functional.
If they read fine in one arrangement it suggests the wires are ok. Need meter to show the issue.
Get a meter on the sender wires and measure the ohms.
2 stroke diesels are just about as simple and reliable as you can find in terms of propulsion machines. Both gas and diesel engines require fuel,...
I'm glad Im not alone in that takeaway. You have a vessel that clearly is a patchwork repair with considerable work left to undertake, and you're...
I'm having some trouble following you here. Posts #7 and #9 both read that you were able to make each gauge and sender work when reversing the...
Make one meter read accurately. Prior to you reversing them it seems to have appeared one was working. Now neither work which suggests that one...
Until you can get to the second sender, sounds like reversing the gauges gives you a temp outcome. Next step would be a temp wire from gauge to...
Both gauges work properly if they are swapped, but only one works of put into proper orientation? I'm not seeing the ground as the issue, but...
Water flow and discharge....my preference was always to keep it above deck where it is easily monitored and maintained. Consider an under-chair...
Good outcome as well as decision to stay wide. I had a similar transaction for my last SF. Found quality used and contacted Rupp for everything...
To be clear, you swapped sender feeds, and now both gauges read "accurately"? If so, when you swap them back does the problem resume, or?
My first obvious step is to swap gauges and see if the problem follows the gauge. My second obvious step is to run a temporary wire from the...
When I read the name "Modine" I can't help but think that John Deere engines are in the near future....
