The marina I'm at got rebuilt a few years back and installed all new power pedestals. There are lots of older boats and commercial fishing boats....
If it is just the ignition switch how would that explain "oil pressure went to 40 psi without the engine running" ???
From photo it looks like you could have mounted it lower. Is there a reason you did not? Are you happy with the performance? Big difference?...
Glad to hear this all came together for you and the results are what you were looking for. Sleep well!!
Thanks. I'll look into the Lorex. I don't need or really want it to interface with my Simrads so that's not an issue.
Looking for some feedback and recommendations for monitoring cameras and possibly alarms. I did a search for this and found minimal info. I posted...
I used a good A/F on mine. Worked pretty well but I don't have the same warm water growth you have. I'm also curious to see what others are doing.
Too funny. Doesn't sound like anything to lose sleep over. If your not changing anything you should be fine. If anything you might gain a smidge...
OK so you are keeping same diameter, pitch and number of blades. So the new props are simply to replace the old ones that have reached the end of...
It's amazing what some builder's do. My former boat, a Sea Ray 39' sportfish only had a bearing in the strut. The shaft coupled to the trans then...
Forgot to mention in my last; Make sure you get someone that knows how to do a proper and thorough blue fit of your new props to your old shafts....
Too bad the yard or whoever attempted first did not have this equipment, would have saved you a lot frustration and concern. This is pretty...
Obviously the key ways being twisted are a contributing factor. Further, as others suggested earlier in the thread I suspect you had an excessive...
Curious why you folks do not install macerator pumps on your fish boxes? I installed one and it works great. The only thing I found out the hard...
Sorry to hear of your challenges. When the guy attempted to remove them today was he just tightening threads/bolts as pulling force or did he use...
As Capt Ralph says, need more info here. What type of material are your shafts? What is your gear ratio? Where are the shafts breaking? The usual...
I have the Globe Surfer III cell based modem. I would say it is marginal at best. It is connected to one of our big antennas and I thought this...
Some good info here. And exactly why I shipped my 54' when I needed to get it from So Calif to Puget Sound.
I went with the Legend 750 modular. I didn't really have a convenient spot big enough for the package unit. The pumps, filters and control console...
As you will see earlier inthe thread, Donzi54 has a Spectra and said he was happy with it. I decided to go with the Blue Water and so far am very...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")