Can any other 43 or 46 owners provide what their cruise running angle is? I put a digital level on the map table static and at 24 kts cruise. I...
Our DC breaker panel buss bar has two 6 ga cables coming off the buss that are not on breakers. One I know where goes, it goes to a breakout in...
It is like our 43. Holding tank overboard discharge is gravity. Can only use when boat is moving forward. Yes, it will fill the holding tank if...
You could install an external plate in as little as an inch of space. The plate would want to be threaded so you don't have free nuts. Make sure...
Our 43 had a fighting chair. There is a thicker core in the area of the chair mount, but it has an external backing plate. You can see it in the...
This is the bottom side in the engine room. The heavy cable right in front is the DC (-). One of the black cables in the bottom left is the DC...
If you need to trace the cable it is the one exiting top right in the photo. There is a junction block on the back face of the plywood where you...
Do you have power at the terminal for the DC main breaker on the back side of the panel? If that breaker goes bad you will loose DC on everything...
Won't let me correct The quarter round by floor is teak with poly, no stain. Wanted it to contrast both wall and floor a little.
Some comparisons: Mahogony gunstock stain and poly quarter round against original interior wall. [ATTACH] Top panel over old oven opening new...
Most of our Post interior is mahogony. I've used teak trim (since it is available in correct shapes) which goes well with the original but is not...
We use Segway Ninebots mostly for small towns that don't have other public transportation or well staffed Uber. They are much smaller than a...
W are going to give it a try.
Found a self-standing desk that folds instead of attaching to the counter wall. WIll replace the casters with felt or glide feed to drop a couple...
I hadn't considered it. I think I would need to find a way to fold and store it too, and it would need to be pretty large. I suggested a taller...
Need to come up with a design for a folding desk so my wife can telework from the boat. I was going to put a dekstop with self-supporting folding...
I will be using a V3 on the Trio flatmount. Interested in skin/core thickness so I can have correct length fasteners already on hand. I want to...
I'm getting plans ready to install Starlink on our 43 when it comes home from winter storage. Looking at the hardtop where I can see from inside...
I believe they were too low, would dive and launch a wall of water on the 3rd wave of a set. I think they also exagerated the roll when crossing...
After much discussion we decided to remove the 'original owner added' spray rails. My best guess is they were put on based on experience from the...
