Interstate Mcbee is a good source but unless that is an extremely low hour engine I wouldn't replace just one piston/ liner , I would replace them...
I haven't been there since Katrina but I understand there are several new marinas between Biloxi and Pass Christian, but unless you like the...
Did your mechanic put oil in the weak cylinder and check the compression again to try to determine if it was a head or the rings?
What kind of strainer does it have?
Depends on the oil pan, but probably in the 6 gallon range.
Don't let the temp get over 180 or you'll be replacing a head.
Cut an inch off the bottom of the door.
I had one cross the channel in front of me in Choctowhatchee bay last Wednesday just east of the mid bay bridge. The boat cleared our bow by a...
Yes, the Tenn-Tom is shorter but there are no locks on the lower Mississippi and there is a lot to see along that route. It's actually more scenic...
We did most of that trip(Grand haven to Panama City) in an old Pacemaker back in 2000 and yes, it was a great trip. Our only mistake was not...
Williams in Birmingham.
You probably wouldn't enjoy the Post engine room either.
What about a Post 46 or if you can get by with 1 head a 43? The 43's mostly had 671's.
Looks like you cruised through some of our favorite fishing grounds. No lines in the water?
I bought one last year from Butler Marine Proucts for around $3,000 but it was only 11'.
Vmc can come into play
Good solid boats. Unless it has been repowered that one probably has Detroit 671TI's which are also hard to beat and relatively economical to...
Do you know the history of the engine? When was it last run? Was it shut down or did it shut itself down? Clean fuel in the tank and valves on?...
What are you using for anti fouling on the shafts and wheeels? They look clean.
White smoke is common on the turbocharged 92 series at startup after they get a few hours on them mostly because the turbocharged version is 17:1...
.jpg&contenttype=jpeg "Click for Abeking")