Fraid not. The condenser is there. These work backwards to what your thinking. Intake is up the middle, through the condenser over the fan and...
I've looked at that as well. You can access the unit under the helm for service but it is a B..ch. Lots of hours to get it out. Couple of places...
Looking at similar on my 44, stand alone under galley bench, duct up to the old TV box. One vent out the old VCR slot, one out the side to the...
Appears to be the same as mine, another thought is to simply make the hatch bigger to allow access to the fitting.
My 44 has everything under the floor hatch in front of the shower, I suspect if you open your hatch and look around you'll find it, whether it's...
What's common on these "dry bilge" systems us to have a manual switch along with auto based on a timer and not a float. You set a timer to run for...
That's why these DIY solutions make more sense, for less than $200 you can cobble your own system together. We've got to remember, the pump is not...
Any word on what part of the world purchased her?
You should expect around 30(ish) gph in the 2000rpm range with those engines. Obviously depends on the usual factors.
That's gonna hurt. !
As SeaEric said. Unfortunately having someone replace that decking would probably cost more than the actual boat. Best look at fiberglass and nonskid.
My question is .....is she being chartered? If not why is she moving? I was under the impression his sister didn't really care about the boat.
That's what m That's what my guy was going to do. If you master it they'll be a line at your door.
Mexico seems to be the "cheaper" build source for this kind of thing. I'd have no issues buying Mexico. China for this application, not so much.
I just installed the power monitor on my boat as I had to leave it unattended for 3 weeks. Had a bit of an issue setting up, called the help line,...
Interesting that Washington has been dead silent on this issue.
That would be wise.
That looks like more than .070 runout to me.
In fact you're going to have to specify to the surveyor that there's possible damage in this area and he's to provide full in-depth report with...
I made my living as a master industrial electrician, I can tell you without a doubt the connection from the wire to the connector failed. Usually...
