I would recommend that you keep networking where you are. Also to find a job before you head to Europe or anything like that. Europe's season...
Some sort of Marelon sea cocks. The handles or body flex on all of the Marelon seacocks from what I've seen.
Both, new Princess and Sunseekers use the Maestrimi's with the tiny criss cross holes/slots in the strainer baskets for the air conditioning...
I'd replace them. I prefer Guidi over Maestrimi, Maestrimi's sea strainers and their baskets (I know unrelated to the thread) are the worlds...
What size cabo? Express or Flybridge??? And year?
This. Marine-tex, let dry overnight, re-drill, install new snaps.
Yes, replace. If you're getting soot on the blanket you have an exhaust leak. If chunks of old iron are falling out of the cast elbow, it's shot.
Marmot was very knowledgable in some aspects of marine engineering. However, he was not completely knowledgable in all of them, yet spoke like he...
It's at that age where I'd keep an eye on things. Don't poke around or disturb anything, just look all over where the blankets exit for any black...
They haven't parted ways, just differentiated names and product. The Viking Service Center outfits and does warranty work on Princesses.
What do you mean by Sport bridge? Sport yacht built in England or Sport fish built in New Gretna, NJ?
Speed numbers are way off for the rpm and fuel burn, are you using the trim tabs to properly trim the boat. In a sunseeker you can easily gain...
I had an issue with zincs not lasting and galvanic corrosion on a yacht. It was explained to me that overzincing could be a problem and if...
Here's a good article on it: "The process of blueprinting involves removing the turbocharger and disassembling it during a turbocharger overhaul....
Jarrett Bay's boat yard is in the area and can haul up to at least 105' that I know of and they do good work. I think you should go down there in...
Beaufort City docks is right on the main drag and fun, but very limited in amenities...….Worth checking into. Lots of restaurants and shops right...
Maoism, I believe the curved fins are a lot more efficient than regular fins when anchored due to their shape and movement. I’ve run a lot of gyro...
Yes, 2300 rpm motors. Yes, I always use the tabs and trim for best speed unless it’s very rough and I trim for ride. 80% load doesn’t hurt...
Some motors such as Mans run better and last longer running 80% load as they don’t make as much torque as cats and rely on the additional boost...
