I agree with all this, but there’s a huge cost difference. Which generally isn’t a problem. The problem is the time, a wrap can be done in a day....
You take out 1” of pitch when going to 4 blades
common on steel boats that have been sitting. Generally they use welded steel pipe for drains instead of hose. The pipe grows rust burrs on the...
The 64' is a newer boat and MUCH faster, they'll cruise over 28 knots with the larger 1650HP C32's.......newer......much smaller than the...
It's entirely possible that it empties directly overboard and the hull discharge is clogged with a mud dobber, or god forbid the yard left tape on...
Yes and no. Lose the circulation pump, trigger board, or blow a circulation hose and you're out of A/C to the entire boat. Also you're stuck...
This is true, BUT opening windows were and are always a source of water leaks on yachts.
The shower has to drain somewhere, it is 99% of the time below the water line. So your Captain has to follow the hose to where it is draining to....
Normally if a boat has been sitting 3 years you go through all systems and check things like this before leaving the dock. An empty water tank and...
I worked on a steel 97’ yacht that all grey and black water went into the black water tank, granted the tank was 1000 gallons. It is quite...
You've gotta use these systems more often!!!! :D
St. Johns river entrance is deep and easy and 2 marinas just inside. St. Augustine has been missing all of the inlet markers for some time, there...
He said they're stacked (one on top of the other) plus it's a 92' yacht. Every stacked system I've seen, the hoses were a good 6' or 7' above...
1/2HP is really light for 10 tons of a/c chillers, especially if they're stacked and you have 10' of head pressure. Upgrade the pump and see if...
Look at the loop temp on one of your individual A/C's. You'd only run one chiller when it's not that hot outside, or you're only on one...
1/2 HP sounds like it's not enough flow for the raw water side. You need to speak to someone real knowledgable or you need a really good tech....
Change both cables.
The GPH should be right at each RPM point.....the speed in the test is about 10% optimistic. I wouldn't bother with floscans......as long as you...
I recently ran a 50' Atlantis, boat was a 2014. Had huge cracks on the hardtop on both sides just aft of the windshield. The build quality to me...
How hard can it be to make a mold for a toilet???
