The new bolts are all 316 Stainless. There is copper anti-sieze on the bolts where they go through the aluminum. Washers and nuts are Grade 5...
For others dreading the process of replacing the steering ram mount plate here are before/during/after photos. Turned out to not be as bad as I...
Good option. Will have to see if the blade will reach far enough.
Did a little investigation today while waiting for the new unit to arrive. It looks like the factory install was by screws coming up from the...
The FB Post group is probably a better place to check for info. Unfortunatly my wife's work travel schedule look like will proclude as attending...
I talked with some other owners on the Post FB group that have added more traditional spray rails, but no one has ones like on ours. One had some...
But where can i tap into a circuit that turns it on and off with the AC system?
Possible option.
That is similar to the 50 Post install I found info on earlier. There is a cabinet under the microwave and I didn't see an obvious screw. It...
Thanks. I had thought of the recess for feet approach. Will look for that.
Where would it be, inside the forward stateroom air outlet itself? There isn't an adjustable damper anywhere in the run behind the dryer or...
What to replace the microwave in our 43. Would like to know what others have installed. Hoping to put in a new combo unit. Ours has some not...
New dryer is in the head where old one once was. Our 43 has a freezer in cockpit. do you have a picture of your washer installation?
I did the install. Was fairly easy as used the existing power outlet and modified the existing exhaust air ducting. It is a tight fit to get...
More on the tank filling mystery resolved. The tanks will not begin to cross fill until the one being fed reaches at least half full. That is...
I have a backflow damper on the way that will go behind the shower vent and close when the dryer is running.
Yes. The original was not vented, but there was a duct from the head shower vent fan into the dryer cabinet to make it "semi" vented. The new...
We have a little more power (500 HP CATs) and no tower running 24x26.5
New dryer installed. Turned out to be pretty easy, the limit was finding a unit that would go through the doors. Master door and to head are...
Getting back to the forward AC would need to run through several closets and the head dryer (soon to be reinstalled) cabinet. Since always have...
