Those fans are available at Grainger.
The flex plates are built so that the hub will spin if you hit something or get a line fouled in a wheel. They're junk after that but it sometimes...
We live on St. Andrews's bay and have traveled the gulf from New Orleans to Key West in a 46' Post. Most of it several times. We can make...
I bought a replacement blower( complete) from Grainger for a Cruisair 12000. I had to glue some armaflex to it to keep it from sweating but the...
What caused them both to seize? Did it sink?
I had to buy a 5x10 sheet. It's hard to find and very expensive.
If you want to get an idea of how the added weight will affect the handling and performance you could strap on some 55 gallon plastic barrels and...
I have one on my 46 and like it. It was broken during hurricane Michael and I replaced it. Not just for the looks but it does turn some water when...
If you have to ask.... you probably wouldn't understand.
If I remove the mattress from the lower bunk there is a removable piece of plywood over the holding tank.
The PVC line teed off the engine intake may be a crash valve, I've seen PVC used in some Posts. What brand heads and pumps do you have?
Mine aren't going anywhere and I have spares!
Posts are simple straightforward vessels. Easy to maintain if you don't get behind. Let us know how the Cats run out. I'm sure there is more than...
Electric motors have much less torque at low rpms than they do at higher rpm, even AC motors with VFD's. I don't have stabilizers on my boat but...
The only time I could get to 2450 wot was after a fresh bottom job. After I repitched the wheels I can get there anytime and the speed numbers are...
My 93 46' came with 26x28 three blades. A few years ago I took 2" of pitch out of them to get the rpms back up to where they need to be.
Alreds Marina in Guntersville used to have a good boneyard of old Chris Craft parts and pieces. I just looked through my pile of parts and found a...
More than likely the key wasn't fit properly the last time it was installed. Either it was too loose or the coupling was loose on the shaft.
Plenty of fuel stops between Texas and south Florida via the icw.
We have a BW 13 sport that we drag behind our Post and it's a good little boat. Stable and dry but it's heavier than the Montauk. It rides much...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")