Mine has measured from 3/4-7/8 at 4 different places from aft of the engines to midship.
You can, but it will be somewhat larger by the time you get it prepped for welding. Still much better than replacing part of the hull.
You can't see the turbine blades without removing the turbocharger or the exhaust elbow. What you see when you remove the airsep is the...
Mercury made that motor with a 20" shaft, you should be able to find one with a bad power head pretty cheap.
I have a Skeeter 20' Bay boat with an adjustable jack plate and never had a problem with it. It raises the motor 3" above the transom and aft of...
Do you have a separate batttery at the helm for your electronics?
I saw that this morning, this could get ugly.
316 would last a while but it would be expensive.
You will want to make sure there haven't been modifications to the fuel system but on my 93 46' the forward tank (300 gal) feeds the port engine...
Don't skip Dry Tortugas.
I've never heard anything good about the fishing there, know they catch a lot of barracuda. There's some good fishing a couple of days south of...
Congratulations on your purchase and welcome to Yachtforums. If you don't find the information you're looking for in the many existing threads,...
There's a nice looking 53 for sale in Bradenton, advertised by a reputable broker, if this deal doesn't work out.
I have a 3/4 full port ball valve on the pump outlet and a tee above that with a valve on the bench side that I connect to a garden hose. When I...
I'm not sure of your age or agility but I did some repairs on a 38' Sea Ray a few years ago and it was not a good situation.
Mine looks just like Gregs. 5" between the tank and sole, 350 gal tank.
Sounds like something I would have done when I was a younger man. If you have plenty of time it's doable but be careful in the open water which...
Where are you launching from?
I haven't made it back to my boat yet but if you find yourself going to Panama City you are welcome to take a look at it.
And I misspelled the name. It's Ringfeder