Ooopps, somebody messed up on that one. Still don't know where the lost oil is. If I recall, your 12v71 Naturals. Nothing exotic. There is...
AND, fasten a nice bonding cable from the tab to a dry hull location. Get a nice braided monel or stainless cable from an outboard shop.
Yes, but you would know it by reduces water flow, not by a damaged water flow sensor. Over all; I'm still liking the riser temp sensors idea...
My friend I don't have one of those red flags, please accept my raspberry as the next best thing from south Georgia; SSPPLLLLLLPPPLLLLS....
If thinking before the pump. The water should be clean from the strainer protecting the sensor. Installed after the pump; If an impeller blade...
With out knowing where the oil went, I wish it was replaced and any other suspect that may pass oil thru the crank end.
That oil cooler has two isolated cores. I'm pretty sure oil can NOT transfer between them. With no oil in the coolant, the leak is not here....
Do I remember you stating in an old thread you had the fly wheel worked on? I'm on the road trying to remember the MH gear wet clutch (wet...
You will not have a solution till we find where the oil went.
I'm looking up the oil coolers and finding a few different models. Most have independent cores and no way oil can transfer between them, some...
Can you fill us in a little on your oil cooler? My 12v cooler handles the engine and clutch in one unit but separate oil paths (forward, right,...
Checked the filter in the 3 bolt flange fitting & found a small amount of clutch material but a lot of lint type material. Unfortunately, this...
Skip, if it works for you and your DYI project works, then go for it. I didn't mean to say anything negative. And, I have a skinny step-son...
Yep, And I criticize them also. Weight savings (anchor, rode and larger windlass), cost (anchor, rode and larger windlass), fashion, on a dock...
Zip lock & vacuum pack the charcoal and put it on the top shelf of the freezer. Like the Jiffy mart or 7-11, it's the convince that is a part...
On the other hand, Deutz problems are not a secret. I'm sure the current owner knows of support issues already. If your boss has the hots for the...
Old Phart may have an idea there using a sea-anchor as a drone off the stern. In low current water, a small drone on medium scope may help....
An other Dick Lazzara folly; Only one anchor on the bow? Pascal & J are on it. Experiments and practice will help you figure what is best for...
Risor temp sensors Working on a Ray now that almost overheated. It had the temp switches on the risers. Bad design in this case, the...
I think you missed the point. The trim tab hose was an example. The inside of hoses can deteriorate and flake like fish-scale. These flakes can...
