BEFORE?? I must have missed read something. BEFORE what exactly. I thought the boost sender was replaced in trying to correct this problem.
Under the heat shield (blanket wrap), keeping the riser tight to the turbo is a large V clamp. Pick up a new clamp. Remove this clamp, the water...
I'm going to call this a 6-71 TI, not a 6-71 TIB. I also see it's vert tight back there remembering it's the stb main. Also MES from 2002?
[ATTACH]
[ATTACH] Resized for Boomer
The UN-cooled exhaust between the head and water cooled manifold log? Under power, you can cook on these short passages. My sep-son heated up...
That may or may not mean anything. Scenario 1; Suddenly issue develops. Scenario 2; All debris in system gets packed down after many hours.
Sent a PM.
Lets fine tune where your talking. Raw water on the metal can or rubber hose? That water should be way below engine coolant temp.
Slap Dab..
Play with the waist gate. Go fishing. Your not running that fast normally anyway.
Oh, would you have cast mufflers? I remember a horror on an old ChrisCraft. What was that years ago, Otter nest in an exhaust line.
If you acid cleaned the system, then ran the engine to flush, a bunch of debris could be collecting in the dump can.
Send us a picture of the turbo, mixer can, hose and what the hose attaches to.
At anytime in it's life, if that hose got hot or burned, it's blistered on the inside. You can not tell from the outside. That's why I stated it's...
IMO The 3116s had problems at the start. Cat did fix the valve and head issues but all owners had to fight (and still loose) claims. Deep and...
The 74/75' alloy Houseboat Roamer I worked on was alloy plate backed with alloy angle. No glass or wood. Only wood was the strips for headliner...
Does not hurt the boot stripe either. Oh, if you live aboard like we do, the fumes may be a bit harsh. Open a port light and close da door.
Lott's better. Thank you
Ah, Had one bug, someone put a splice in one line and it clogged with hair and stiff there.