Baia under diameters their props, or it’s a hull design issue. But even the 63’ with 1300 takes a hope and a dream and a mile to get on plane, as...
Azimut has truly earned their reputation in the United States. They sell tons of boats here, yet stock virtually no parts, service takes weeks if...
Do you have any pictures of the bottom and stabs that you can post?
When you look at the manufacturers of these boats, they tend to favor arneson under 90’ and jets over. I have not run either in the over size...
They’re gauges. I’d much rather see what condition my air filters (wc), fuel filters (fuel pressure), turbos (boost), all on the helm display...
I’ve been on that boat and it’s a terrific running boat, terrific sea boat. At 1200 rpms it’s doing 20 knots.
I’d sure as heck rather have arnesons in rough seas than jets, I’ve been in rough conditions in both and never lost thrust with arnesons and think...
Yeah horizon.
What does this have to do with how much Vaccuum is present at the air filter? My attitude is not holier than thou, it's just that your question is...
NYCAP give it a rest. It's technology and the way of the future. Boats are FAR more complicated than their engines nowadays. You have to boot...
Look at the cat report, see what the loads were at cruise. If there is an issue with one stabilizer fin being out of alignment, you'll see a lot...
That's what the MAN owners manual is for, it explains all of that. The gauge is labeled "air pressure at air filter" and expressed in a negative...
I remember people doing injectors on Detroits often. Also having more overheating issues. Having bad injectors etc. I can't, I don't even know...
Tell him the only difference between his 1652HP C32's and 1900 HP C32's is flashing the computer. That's the only difference is the computer mapping.
It goes both ways. New motors can alarm the Captain before the motor washes out a cylinder because the D.D. injector split a tip and now looking...
It has nothing to do with counter rotating props. Could have been the stabilizers reacting to the sea, the windage, etc. A skylounge adds a lot...
Propped correctly I cruise MANs 1950 rpms and they like it there.
2" less pitch would be the right answer. BUT, you need a prop shop to scan what you have, then recommend from there/
Well the Pershing is 20% faster at cruise and WOT than the Riva while being 20% heavier and only having 10% more HP but same engine weight, so...
Arnesons are easy for running one one side as far as tracking goes since you're steering the propeller also, plenty of steerage. Service is...
