I think you mean MMDS are taken after the turbo but before the aftercooler.
They're semi-displacement. I wouldn't consider them a long range ocean crossing vessel as one would a Northern Marine, Nordhavn or similar.
I haven't seen the hoses insulated. The insulation is usually added to the outside and to be correct in Florida like ambient temperatures and for...
They're easy on fuel compared to C32's of that era. However, the 86' Johnson I would think would be hard on motors. It runs very bow high at...
Thanks, was curious. The man v10-1100 CR's also run at 1250F at 80% load, both boats will hit 2350-2360 rpms WOT with full fuel/water.
What EGT's are your C18's running at 80% load? The 1200HP V8 MAN's run EGT's right around 1250F at 80% load in 83F water.
Just mount the pyro gauge sideways on the starboard support bracket for the garmin.
Well, you always need to have a clean bottom. A dirty bottom will overload ANY engine no matter how lightly it's propped.
No, stick with what you have. Running water hoses and everything else to make a chiller work in your size boat will be prohibitively expensive.
With my experience in yachts. I would NEVER want to cross the gulf stream in a wood boat again, as in ever. They stopped building boats out of...
Aside from Arnesons (which are an entirely different matter entirely and you're not going to get around overloading the engines at slow speeds)....
I've managed/maintained a few yachts with engine room air conditioning. It does nothing with the machinery running. But it's very good for...
The 58' Sedan Bridge is a good sea boat as well as a good layout. One of the best Searays they made, IMO. With the 900's they cruise at 28...
It looks fine, but does add to your air draft a bit over the previous one
They have a pool right behind the restaurant. I think it's heated. Downtown Brunswick is a nice little touristy beachy town. I've eaten at...
You may want to watch the entire season of Below Deck Sailing Yacht and actually chartering one before taking the plunge......when you see...
There's azimut USA in Fort Lauderdale and they'd sell direct to me. Try Ingham engineering, they may be able to source some of it, they...
She'd pay a big price with me, just with what she said to the Captain.
Any good canvas company can make a new Bimini top. P+R canvas in Fort Lauderdale. C-worthy, General Fabrics etc. Exterior parts are a whole...
Coastal Kitchen at Morningstar landing marina is outstanding. They have the absolute best Shrimp and Grits in the South. They also have a...
