Both. I've found the quality lacking on both, although the 65' might be a hair better. Speed is measured on yachts in knots, NOT mph. So take...
I ran by this monstrosity about a week ago. I'd say that 2/3 of the ship is gone and only the midship section remains.
The problem is, most islands that are easy to get to in the exumas don't have protected marinas. I wouldn't even consider Great Exuma. Yeah it...
Well, the standard Verado service schedule is every 100 hours (oil/filter, fuel filters) and a more major service every 300 hours. So extending...
If it's the plastic rubrail, you want to put them in hot water to heat them........
You're much better off finding a running boat. As to say if there are access hatches, who knows what they did. Who knows how many or if any of...
The newer LED's are quite bright and what all of the big SF manufacturers are installing. I'd go that route, the Halogens 120v got really hot and...
Not good. But at least it's far away from other boats in a crowded marina and also close enough to land that everyone got off safe and tendered...
And, in the remote chance you do find someone to work on them, where on earth do you find the parts? We were waiting 4-6 weeks on parts everytime...
NO, you cannot remove the trim tab. It's part of the running surface. IF your boat is listing that much to port, it is most likely the source of...
I've managed a yacht with the Cat C12.9s made by Iveco I believe. We had tons of issues with them. By 75 hours we had a turbocharger replaced...
You're mixing up Walker's Cay with Normans Cay. Fisherman never visited Normans Cay, unless smuggling drugs for Carlos Lehder was their business....
I know of several manufacturers that will be in the show. I am running a yacht to the show. I never attend boat shows unless a customer asks me...
5G is very short range, they need a repeater about every 300 yards, unlike 4 G. 4G Cell phone antannae's are somewhat directional but in...
I gained 10% in speed. Think of all of the weight of a can of bottom paint, half of that weight stays on the bottom after it dries. Then the...
I don't remember exactly and would have to see the engine to see it. I think it was in the secondary filter housing, but wasn't paying a whole...
Yes, I’ve had both the priming pumps and check valve fail. Change the check valve. First it starts doing what you saw and then it fails completely...
1” pitch isn’t going to get you any measurable speed and just going to overload the motors. You’re better off spinning them 25 rpms more with the...
I anchor in the south mooring field in front of that creek. In most conditions it’s well protected and very good holding.
I just put a little 18” phantom closed array on a sportfish, the detail was absolutely impressive over the xhd and with such a small dome
