Rudder help Jim, I cannot offer advice based on the premise that I have actually done this, but my thoughts along this line are based on...
Our AC unit is located in the cabinet at the end of the galley table. It is a 16,000 btu and is not capable of meeting the needs of cooling the...
Determining the reduction gearing Don, I think that Pauls last advice is more on target as the first idea to spin the motor over would require...
cracks in the hull sides Dear members, Our 1968 Regal Aluminum had two areas above the hullsides that had water stains that highlighted cracks...
Dear Group, as promised earlier today on the yahoo site here is my dumber than dumb things I did wrong this past weekend! Let me take you...
Paragon making noise Yana, What kind of noise and at what rpm's? Check out the comander club swap shop. They had some trannies available a...
comparing commanders/Roamers Personally I know this will stir the pot on the Commander site as they lurk here as well! Commanders are...
commander club The Commander club is actually very alive and well. I lurk there frequently, having owned a 38' before being smitten by the 41...
Where in the world is the Commander Club? For their own reasons the Commander Club has not joined the Roamer Group on the Yacht Forum site....
opinions on 430 lincolns I think Eric has hit it on the head. The first Commander I looked at 1964-38' had 430's as original equip. When I...
is it a roamer? The Michuron was/is member Greg Landis' boat if my memory is correct. Mark
Eric, Was that a compliment?? Seriously, nice graphic you grabbed! Explains the issue clearly I would say. Mark Planning to be in the...
We had the same issues! Our cause was water intrusion under the edges of the teak setting up the conditions for the corrosion. I removed all of...
ForSale ( Cheap) 1 Set of Paragon HJ7-25L and R Transmissions 2.5:1 Reduction. Used running take outs from a 38 Commander in Racine...
Yes we had to spray the hi-build on the sides a couple of times (in addition we sprayed a grey tracer or indicater so you had a differential to...
original fairing Jim Wick from LPX sales might be able to help you. I also re-painted and re-faired my hull sides. I only had a few small areas...
nautilex vinyl I would agree that Nautilex wears like iron in a boat invironment. But our deck had rotted below the outside seams of the...
Tek dek is easier than teak parquet??? Ok Eric, If you say so!!! Looks like a lot of work unbolting the batteries from the boxes and then...
Chris Craft Ownership in 1989 I would suggest that you consider e-mailing or calling Jim Wick at LPX sales in Bradenton, Fl. He worked for the...
Rough ride??? As a Former 38 Commander which is a very stout and sturdy glass boat with a more substantial keel line, I was a tad apprehensive...
