I hate to see that go to the scrape yard but I will offer you $50 plus shipping to Ct 06057.
installing simrad ap70,ac70 autopilot. I need drop cable and backbone cable. Wanted to know who makes the premium cabling
who makes the top quality nmea cabling . Maratron , simnet , raymarine. ?
I will replace o-ring and valve and test with soapy water for air leak
Once a week have to add air to it. Other people tell me to replace it with a helm with integral tank. The ones like sea star . Those seem to be...
I am looking to replace whole steering system . One that has tank in helm. My existing engine and transmission controls are cable which are fine.
Look to replace hynautic steering helm on a 1981 46’ Viking. The existing helm has a tank. Would like to replace helm with a simpler system....
I am looking to install a Simrad Autopilot on a 1981 46' viking convertible. Any recommandations on the Nac-3 ,A2004 or the AP70 .
You might want to flush raw water cooling system, change raw water pump impellers, and when first starting engines be prepared for stuck injectors...
looking for front window glazing spline . I am resealing the front windows and the glazing spline needs to be replaced . Anybody know of a supply...
I would be interested in your used one. I am looking to put one on a 1981 46' Viking Thanks Peter Falkner
thanks for the info
I replaced the rudder shafts due to corrosion and I am in the process of replacing the rudder table. My question is what is the toe in or toe out...
I have a 1981 46' Viking conv . In the process of redoing all water systems (wash down ,supply and waste) Looking for advice on what pumps to use...
they are green
The specs say for engine serial # n90 with a no load speed of 2500 rpm . I think with the bigger injectors they had a lower rpm
Thanks for that link I looked at that website and saw that they were pins but completely missed that they were nylon I must be losing my mind
I have all tools required for Detroit, been a heavy equipment mechanic for 30 + years did use engine serial# to verify n90 injector
I need to figure out what holds the pin in that holds the cylinder to the tab and bracket
I have 8 injectors now my suppler only has 6 left waiting for two . I was hoping to change trim piston by reaching in water from dingy will check...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")