A small Honda gen will run every thing but AC. Set it on the swim platform plug her in and let it run. Very efficient 1gal=10hrs. I know many...
The Maxwell RC-8 I installed last spring is a GR-8 windless.
Its time to replace my 1995 clarion on my 355. Is it possible that its a plug and play with a new unit?
Perfect. THX My 355 same year. I did change tops this fall. Green gone..
Would you happen to have the part number for the button plugs that hold those panels on??
Go to the Attwood site and get the color number you want. I ordered mine through West Marine. You will have to buy the entire trap vent and screw...
Had mine done by my small body mechanic, as my 245lb torso will not fit. He removed the fire bottle and squeezed in between the Genny and...
Next spring I need to install a Glomex on my 355 arch. How am I going to run cable into bilge?? I believe it wont be easy.. What are my options??
95' 355 Gauge not working. I do have power to tank. Most likely dipsitick? THX
Winfless My 95 had the original windless. Remove the cover and in the center of capstain there will a nut. Tighten it up and I bet it works for...
Here ya go TH Marine LED Companion Way Light ( Chrom Bezel, White Bulb) - LightUpMyBoat.com transformer built in. I may change mine over to...
1995 355 Installed in elec panel
Ok. I have a 1995 355 AC. Just went through Genny issues. On my Gen the rotary switch on the Gen cover is hooked to the Gen battery. In ON...
I dont think both both were hooked at the same time. What if it was?? If it was wouldnt the relay control that issue?
Yes. Have power to #1 relay. #2 no power to Shore Power/Gen relay....
No that is not a problem. I have a auto relay for shore power and Genny. I have shore power juice to relay but no gen power to relay..
OK. I have no gen power to #2 relay. Power from gen to #1 and power to both with shore power pluged in. Genny fine has to be a wiring issue....
Thanks timjet. Are your davits bolted thru the swim platform? I am going to use 9" SS bolts with a 1/4" aluminum backing plate on bottom side...
Thanks gbarger, was able to find replacement caps through that link. On order...
Thanks but I have checked West, Attwood, Perco and Forespar. Of course I can not find hose's inside hull.....
