nice outfit but I would think since the OP has a 1985 50' CC, not a new Pershing 80 like you, the 12k Flir and UHD radar MAY be a bit overkill in...
I went with a pair of Garmin 5212's almost 3 years ago when they first came out as well as the garmin radar and a pair of GMI 10's. can'r beat...
nope, not bolted to the wall. I can see the space between the tackle center and the wall. the shelf that forms my initial step out of the salon to...
I don't think he got to the 24 cruise/30 WOT. I have the same setup and have a 20/21 cruise burning 60 gal and 29 WOT burning a hole in my wallet
it appears to be original. I spent about a week with sigle edge razor blades trimming down the black rubber from the PO sanding the deck. every...
never figured out how to remove it. I can open the tackle drawers and remove the drawers and see 2 or 3 bolts going into the deck. I can also see,...
Dave, tell him more fuel than your Hatteras, but a much better ride in the rough stuff!
Capt J, I appreciate your comments and understand where you come from. using your trip of 345 NM, if a boat runs 10 knots and burns 7 gal per hour...
I troll marlin at 7 knots here in the GOM. thats idle and it seems to work for the fisherman down here.
oops.... .7 gal per NM roughly
btw- I troll at a fast idle 7 knots burning about 4 gal an hour, 1 gal for the gen set, so that would be about 1.4 gal per hour. hard to figure...
you assume the potential purchaser is looking to run the boat as a cruiser. If I was asking Dave his fuel burn, I would want to know it at his 19...
there are also LED alternatives in the market now. if I recall Hella has them. you may want to check them out
Your old Bertram would have moved itself Dave:)
congrats on the purchase! your HIN number is BERS0516M8, she's a 1982 model and was originally listed at 250K. you got a steal! be happy to answer...
found a company called buck wood craft that sells the starboard as (anti slip). they also quoted me to cut and shape the 9 steps I need for $75 in...
Mike, what product was used to finish your fighting chair and flybridge panels? I'm about to refinsh my chair and am leaning toward an AwlGrip...
Thanks! PM sent with my email addy
Did you have a new aluminum top made for your flybridge? if so, can you share the cost of it? I need to get mine redone due to corrosion.
has anyone replaced their ladder treads? Mine are teak and showing signs of better days. I'd like to get the grooved white treads but can't find...
