I will admit, We did install an Elegance on a customers old Hatt (replacing the POS Galley Maid), with ships pressure fresh water. Long run...
You did not comment on pulling the dip and reading with out wiping cold. Your arguing with me with out trying.
Only 9 blocks away from HH.
It's the weekend. Give this thread some time to digest with the kids a while when the R&R is over and work comes to mind. It's amazing when people...
In your post #10, Are we just talking about one/same clutch? From what I can read, You say the cold (not run in a long while) level is near the...
Working on a 72' Hatt, the master heads were below the black tank top. In the forward engine room, Behind the master heads, near in the bilge, is...
That is why a water pressure tank installed closely to the HH system comes to great play. It charges at the ships 40+psi and when needed, gives up...
DDC does the same for it's older after coolers, (Not inter-coolers). The freshly cooled coolant goes thru your AC before it goes to back to cool...
I think the HH's work best with a water pressure tank very close to the head. Recall this was in their installation instructions. I still have...
With that monkey-metal solder, I wonder if it was the zincs eating up that less noble material?
I owned the mold keeper from Cary 32 to Black Finn 32. Serial number 000. It was the boat show boat display with chromed out Crusaders. When B...
Had that same problem on a Hatteras main engine a while back. Would get hot at speed. Old hose laminate was sucking in and collapsing. It does happen.
Why, It is probably to Cats spec and they sell a lot of air coolers. Further, They have a denial path on extended warranty claims.
Any failures around us has always (when autopsied) been a solder failure. I don't see much difference between a bonded / non-bonded requirement...
Another Carry copy.
I mentioned years ago, To many different formulas in the solder used. Ever notice you can not repair a Cat air cooler? The solder will not puddle...
Incomplete story. Reads like a Darwin tale. Where is a whole report?
Yes, Call a proper engine tech. Is the engine model a secrete?
Based on the old Carry hull. Black Finn purchased the molds and continued until the Combi's came out. But that is the original Carry design. Dam...
