Very good an all.
Almost, Almost not as bad as the Boat Bimbo. If it was a serious interview. Alexei would not sound as he was in a tunnel. Richard would not wonder...
The arch is going away also. Thank you for your time.
Oh no, Not the boat bimbo, again,, again.. Worse than Below Decks. What evil torture could come to your mind next?
https://www.carveryachts.com/contact/contact-us/
I would also include checking shaft coupler surface with the shafts (repaired or new) while at the shop. Ensure the shop marks what coupler goes...
2000 115EXLPTO 25" inch shaft. 4 Cylinder, 2-Stroke Engine. Got to get it out of my drive way. This 25" Merc was running fine near 6 years ago...
There are 2 similar threads on YF now. Both are in denial they have problems.
Houston; there is a problem. At idle, You have a bent shaft.
Something to ponder; It was fine before a line got tangled. Now, after the tangle, it is not fine. Tangles do not make engines out of align....
Many years ago I found a few of these mounted on a Din Rail. One went to the ships A/C pump. It was a nice installation and I thought it was a...
We had company insurance but never brought it up during discussions for delivery & sea trials. I just ensured I had a letter from the owner and...
Stepped in What??
You have to figure the weight of the coupler and length of shaft from the cutlass less the prop and it's leverage (titter totter logic). It is a...
Well, It is a 16 year old Worsterbroke. You may have another relay issue. Replace them all and re-test. One day the world will be free of...
Well, If you are not going to pull soon, You have to try. A multi point will tell you quickly if it can be fixed or not.
You would be amazed (horrors) how many issues come up from bad strap lifting. They try to splash real quick and correct when no body is watching....
Measuring at the log and finding 0.070" wobble can be serious. But, I can also see an alignment issue causing a D bend or shaft whipping. Also,...
Oh the taps on the shaft end? This end out. Probably a double taper shaft and it helps the shop know what end is the prop end. After one of my...
The next question that needs to be asked; was the boat operated after the damage, then look carefully at the clutch flange and output shaft...
