The current will affect your course/heading differently depending on speed, but a head on current of 4 knots will slow you down 4 knots in all...
Usually not. Some also put the pumps above the tanks so they are not self priming if you empty the tank...
Same with me, and the compass takes also at least half an hour to spool up...
What do you mean with "all electric pods", I have not seen any that you can compare with IPS and Zeus?
If you have a strainer like this, make sure the plastic insert is going ALL way down, otherwise the cap will leak even when tightened... [ATTACH]
"if you can’t convince ’em, confuse ’em" ;) But in fact it is the LOA and this is what our near competition also use. Our aft platform is divided...
With larger props it probably will, now it is 39... The hull is the same as our 54 but the marketing name is including the platform, so it is...
First boat is now in the water and will be presented at the Cannes Show in September... [ATTACH] [ATTACH]
Hmm, what is this then..? http://www.samsung.com/uk/tvs/curved-oled-s9c/ or this; http://www.samsung.com/uk/tvs/qled-q9f/
The hose was not totally cut off, but had a 4" long split where perhaps half of the water was spraying out so the pressure was not zero. And of...
OK, you said you were away 1-2 months at the time, and was afraid the batteries drained... but with crew checking twice a day that would not be...
Hmm, if you leave the boat with the AC running, you should be glad that the fuse trips so the boat is still afloat...
It is a good looking boat, but rather pricey and not really performing as I would have thought. It seems to go very wet and not very fast, despite...
I had this issue on an engine once, where the filter in the strainer did not fit right so the lid was not really tight. Easy to check by taking...
It is a 36' Hinckley Picnic... [ATTACH]
With boats, there is without the L, Single Handed or Single Handing...
Here is the Australian 100' CQS, one of the fastest mono-hulls in the world... [ATTACH]
Of course, I just had this engine on my desktop since another proposal four years ago on a 23' which was a bit too small for 557 hp... In fact I...
Perhaps they have seen my proposal for an open 29'... ;) [ATTACH]
I had a look at a nice one here in Sweden a couple of weeks ago, it had BPM engines... [ATTACH] [ATTACH] [ATTACH]
_2.jpg&contenttype=jpeg "Click for YF Listing Service")