IMO, Fire your marine mechanic. He just wasted a lot of your money. Now you have a more complicated carb installed, performance may not match the...
As you have pointed out many times before, there is no access from the deck to recall the fenders on some new designs. Further issues include SFB...
Heat on the shaft, Replace that front seal for sure now..
Pascal was here before on his previous work boat when he took it over. Fresh sensors all around I recall took care of it. I remember going around...
I had to download one of the original pictures from above and zoom it in real big. Post #1, JPG #2 The negative leads etches are tied. 2 wires to...
On power on, it assumes the feedback unit is there, but when it moves the rudder and no change in feedback value, it logs the error. Depending on...
Usually not much iron for a magnetic dial base to mount on in a bilge. I use a heavy scrap iron plate sitting in the bilge. Also had a metal tab...
Very good point. Never allow your gen-set thru hull water to be forced or scooped into it's raw water system.
Should be the same key as when the coupler was surfaced. Could be just assembled wrong or differently than the machine shop.
Jelly-fish are just a bog blob. They will clog any screen, inside or outside. The outside strainers could be helpful on self clearing while under...
Before I really start calling the captain in, I have to ask some questions; When asked about speed, Was in kts or mph. Sales people luv MPH, real...
Check out the bottom of the oil pan while it's bottom is exposed. :D With the clutch out of the way, you should be able to fondle the pan bottom...
You get the plate off the in-shaft O K? Remember to look over that front seal. Then, Ospho and paint well your next plate. Fresh high grade bolts...
Awww A lil Marine-Tex and it will work like new. You did get that bilge water issue resolved, did you? The kids on this thread have some great...
I assume you are still shopping other venues..:):)
What's up with the spacer? Shaft not long enough? I do hate spacers. How are you sure the spacer is centered perfectly on the clutch output...
Interesting the seller would risk the yachts sale over a non-Rolla prop shop. Is he not conscious?
Any updates? What did you find? How was it fixed? Lots of pictures (we like to watch)..
Horizon, Standard and then Parker kept the System 9 RO system supported for a long while. Seems now that I'm updating my RO requirements, that...
I'm confused, was it not assembled in the shop? Surfaced on your shaft? Re-assembled the same way on board? Same shaft key? Tapered shaft only...
