Most all of them do that in the 50-75' range, the entire boat shudders inside.
The ONLY yacht that REALLY scared the SH$# out of me in a relatively calm sea 2-4' off the stern 1/4 was a Marlow. We were at 16 knot cruise and...
Poseidon marine blinds in Fort Lauderdale has always been fairly priced and they did a great install on a few yachts I manage.
Blue silicone will most likely collapse with those bends. I'd stick to wire bound marine wet exhaust hose.
Keep in mind these still need to be cleaned by a diver once and a while and I've seen a most divers overlook poking the holes and cleaning them.
the lower Mississippi route is 350 miles longer, however with the current at a 10 knot hull speed/rpms we were doing almost 15 knots on the upper...
I ran a 63’ ocean that the owner owned from 1 year old until 2015, eventually we had to take 3” of pitch out. I’d see if you can locate a new(ish)...
the bottom 10% of the tank can’t be burned either. The pickup is going to be an inch above the bottom of the tank or more and fuel sloshing around...
No, it’s 6 yeas, idk
There is NO way you can make 280nm at cruise in that size Azimut. You have 2 options do an overnight at 1000 rpms overnight, or stop in Mazatlan.
They all got old and retired. There are still people there to answer those questions.
The dealer. Sun power or Jaz.
Hatteras is not shut down and is building boats. You can get someone on the phone to answer questions even on a 1988 motoryacht. I wouldn't...
NO it is NOT a reserve. No it cannot be used. 1" or 2" of fuel sloshing around in a big fuel tank isn't usable. In fact I base all of my range...
I agree. But Arnesons aren't without their share of maintenance. Props need to be crystal clean. Ram seals will leak if trim and steering rams...
While a Jaccuzzi could be put there, it would take massive structural change to the boat to allow for that kind of weight. You couldn't run the...
While the OTAM has better performance, most yacht owners don't want to deal with the headaches and limited maneuverability of an Arneson boat. Or...
It depends on the size mix, if you're just counting numbers. IF you were building lets say 50 boats a year and the median size was 75' and now...
I don't know enough on Nordhavn to comment. But what I do know is it takes them 3-4 months to finish a lot of things on the boat here before it's...
Simply pump up the system to 12-15 psi and put a pressure gauge on it. If you have a leak you should know it, as you'll have sea water in your...