Does anyone know offhand if the New River is State, Fed or local jurisdiction ? Now that the definition of a livaboard vessel does NOT include...
I stopped Matthew Town in 1991 on our 70 ft en route to Vancouver BC, small harbor entrance, was a wreck just outside, partially submerged,...
Ahhh, now I see, the end justifies the means, gotta spread that to your kids...
I have not seen one protester go to Iraq when Saddam was destroying one of the worlds great wetlands and when he set fire to the oil wells. These...
That may have increased the fluxgate offset degrees, doubtful would start course S ing but you would know how to check that out.
Is this developing into a "political " thread ??
If you have a NAV mode that steers by an off course setting, say .02 nm this will help the pilot steer a tighter course than by compass , that's...
Canada is a friendly neighbor to the US, cost is low, ad measure, US CG deletion and you are done..if you bring the vessel into Canada, taxes will...
Well, we are teaching them aren't we ?? as long as we export expertise it will come back in spades to haunt us.
Actually it was the complexities of the fairing work, paint mix, temperature and preparation of the aluminum that really got to him, he sprayed...
We must remember that Japan played a similar role in the world economy before it's close relationships between bankers, companies and Government...
Not to disagree with the authoritative Capt. it is not remotely like automotive spraying, the two skills are different, I had an employee who...
What I learned I learned from a professional sprayer and I still get it screwed up most of the time, if not doing it on a regular basis, specially...
From the City of Vancouver in beautiful British Columbia, best wishes for Christmas good health and happiness in the coming year, a great forum...
Cummins MerCruiser Diesel | QSD2.0 Might be a place to start.
Wrong post, sorry
Any news on the investigation ??
If you must do a temp. thing, use schedule 80 PVC, higher temp rating than ABS, it will be noisy but ok for temp. operation.
I would suggest very strongly, you consult a DD service dept. that info is critical to proper operation of the engine, any incorrect info obtained...
I use a tie wrap on the end to squeeze the vanes then as it gets pushed in the tie wrap slides out along the vanes, that with some lube works real...
