A good way to mount a transducer inside the hull is to site it first. If there are any air bubbles in the laminate, there will be a great loss of...
It's not something you can rely on. I tried to reach the USCG on every CG frequency from Cedros Island on the Baja one time and could not raise...
FWIW, a chain can be re-galvanized. Had one done once, and the results were not desirable. When they did it, they gathered up a number of loops...
+1 on the glue strips. Had a cucaracha problem on a yacht, and tried the bombs, sprays and "hotels". None worked for long. I learned that...
We do a lot of deliveries to/from Ensenada, MX. It's about 60 miles, and we get questioned about needing two people frequently when giving a...
No, no SS liners, and what you say is what happened. A little drool at the silicone hose, and snug up the T-clamps, then OK for a while. "E"...
That's what I thought until I had an issue with 3406 Cats that were overheating and distorting the fiberglass exhaust tubes. The engine temps...
Maybe try a local industrial bearing supply company. Walking in with the take-off bearing works best. I avoid Monday and Friday visits. They can...
Interior wood types are somewhat driven by veneered plywood availability. In general terms, I have seen many interiors that look like a match for...
This situation brings RER's post #13 from https://www.yachtforums.com/threads/leaking-shaft-seal.33223/#post-297314 to mind. If the engine is...
Good point!
Sea travel would likely be more than 10 days from anywhere in the U.S. except Hawaii, maybe, if that's a major issue. Many ships make multiple...
Good thought on a common point of failure. I don't know Carver's at all, but my first thought is that there's a relay in the circuit that provides...
There's a lot of discussion about old formula versus new formula, so don't let that $7.59 price get you too excited. I've got a bottle of old, and...
Sounds a little vague and open-ended to me.....
When it comes to wax and ceramic discussions, it's good to know the specific product. Apparently, some big-name spray ceramics are not so good....
Assuming it's in salt water, 1t would be best to remove it and have it cleaned, lubed, and protected. The probable outcome if you leave it or...
Garmin begins to restore Garmin Connect features, services, says customer data not impacted Good to hear. I was thinking all along that a tech...
The big question is; Is the need occasional while traveling, or constant at a home slip? From my experience, the fix is often determined by the...
Moisture wicks up from underneath. I would reef out as much bedding from under the wood as possible and then inject bedding in under it. Boat Life...
