I've used lots of parts from Interstate Mcbee and never got any bad ones but if you order liners from them, be sure and give them the actual bore...
I've had a couple of fuel supply hoses do the same thing. The inner liner collapsed under vacuum and wouldn't allow fuel to flow.
Those blowers are available from Grainger.
Pay close attention to everything Ralph just said!
Are they fresh water cooled(heat exchangers) or raw water cooled?
Give the aluminum fuel tanks a good going over while you're there. You'll also be able to look at the rudder linkage and steering cylinder while...
Flight Systems in Pennsylvania makes a replacement controller for most of the old cruise air systems. I have two in my boat.
Guilty, and the emergency room visit wasn't cheap. I still have the old parachute but I made sure it isn't useable.
We are also gathering supplies for those folks so please keep us posted on the road conditions.
Our thoughts and prayers go out to all the good people in the path of this storm. We've been there and know what you're going through.
Our local shop doesn't have any and has no idea when one will be available. He's checking with some other folks now but it doesn't sound...
Sorry, I found it on your first post. I'll do some research tomorrow.
Give me a part number and I'll check my local sources.
Interstate Mcbee is a good source but unless that is an extremely low hour engine I wouldn't replace just one piston/ liner , I would replace them...
I haven't been there since Katrina but I understand there are several new marinas between Biloxi and Pass Christian, but unless you like the...
Did your mechanic put oil in the weak cylinder and check the compression again to try to determine if it was a head or the rings?
What kind of strainer does it have?
Depends on the oil pan, but probably in the 6 gallon range.
Don't let the temp get over 180 or you'll be replacing a head.
Cut an inch off the bottom of the door.
_2.jpg&contenttype=jpeg "Click for YF Listing Service")