Speaking of discounted engine packages; Anybody remember the BMW gas engine and stern drive (I/O) package. Sweet, strong, quiet and all was good....
That is the engine I remember. Don't think it was a favorite in the U S. I recall a YF thread talking about these engines before. I fear these...
I'm not Cat savvy. Is the 12 and 12.9 different engines? Is the 12.9 a Euro block?
Bennett or Insta-Trim? Working before? Fuses checked? Auto return by-passed? Is "key on" required?
Coolant venting. I am sure any trapped air has long ago worked out. I assume your coolant recovery system is working fine including fresh 7lb...
Thru the years, we have found many external issues that would contribute to warm engines or real raw water restrictions. The butt bitters were;...
This may, but usually not a good indicator dock side. At idle, the beam level of so little can make the out water look greatly different. At...
Starting here first; Same coolant and mixture (50/50 or 60/40) in use for both engines? Is this at idle dockside or underway in gear, making...
Then 475hp is what the engine is tuned for. This tells us you also have a high out put engine with by-pass blower. The 6-71 starts life as a...
Always a good beginning when they don't roll over.
I won't call it computer controlled, but there are a few electric/electronic controls on the gas Kohlers that requires some experience to work on....
Raised on the St Johns river, the channel passes close to the many ship terminal ports all thru Jax. The smart operator knows to stay well clear...
With a Turbo, more questions; Wet or dry turbo (water cooled or warped in foil)? Inter cooler (air cooler between the turbo and blower)?...
Is that the carb or injected gas engine? I think the Carb runs for a few seconds longer than the injected model after shut off. The ignition is...
Need to ask a few questions; The 180 & 181 temps are from gauges or IR gun? 6-71 naturals? No Turbo? Original DDC or Covington or SS or ST or...
BZ
Vent-less dryers have been used before. What a disaster. We just received our new GE washer & dryers for our Bert. 23 3/4" wide. Going to rub...
Relax I'm heading down there to figure this out. Just have to work out our schedules. I promised SAE hammers and a sharp chain saw.
