I sold my 1986 Bertram 38 III back in 2014. She had the 375hp CAT 3208's and was a good running boat. [ATTACH]
PSS pro's installed and are performing perfectly. Very happy with this upgrade. [ATTACH]
No water in either fish box. Those macerator pumps restrict back flow. The Rule bilge pumps do not. No that is not the trim tab hydraulic line,...
My aft bilge pumps have a loop and then they discharge via a 'Y' with the fish box macerator pumps - port and stbd respectively. The discharge...
The bilge pumps do not discharge out the transom. They discharge out at the waterline forward of the cockpit.
I noticed water in the aft bilge after a weekend cruise in the 40 Cabo. My boat has (2) rule pumps in the lazarette and I'm going to take a look...
Florida Thrusters installed the bow thruster on my boat and I'm very happy with the performance. [ATTACH] [ATTACH] [ATTACH] [ATTACH]
The Cabo was launched on Friday and completed a satisfactory sea trial. I will keep an eye on the prop speed to see how well it holds up and...
New PSS Pro shaft seals installed. I completed a satisfactory sea trial. Working great. [ATTACH] [ATTACH]
Props on my Cabo turn outboard in the ahead direction. 35 knots WOT.
I had a 1976 Egg Harbor 36 Sportsfisher that had the same issue with the aft bulkhead in the cabin. The previous owner had new sheathing...
I have not seen much of anything stay adhered to the leading edge of rudders. The yard ended up applying primer and and antifouling to the...
I am going to be applying prop speed to the shafts, struts and props on my 40 Cabo convertible with C12 CATs. Trying to decide about the rudders....
The original Cabo lip seals have been removed and thankfully I do not have any damage to the stbd shaft due to the overheated lip seal. New PSS...
[ATTACH] [ATTACH] Switching over to Duramax non-metallic cutlass bearings as my struts are a stainless alloy. Any feedback on these bearings as...
I just removed my original Cabo lip seals and will be installing the PSS Pro series shaft seals.[ATTACH]
For now due to the battery box configuration, I am going to remain with the Optima AGM's.[ATTACH]
Both exhaust fans for the heads replaced.[ATTACH] [ATTACH]
What is strange is the previous owner changed out all on 10/21 but left one of the start batteries which is the one I just swapped out. This is...
Thanks for all the help and after reading through the tech manuals I decided to disconnect all (6) Optima AGM batteries to individually test each...
