I have attached a couple of photos of the 40 Cabo set up. One with Federal which is my boat and one with Veem. I ended up servicing my Federal...
What is the model number of the unit on your 48? Is it one of the combo washer/dryers?
I had prop speed applied to my Cabo 40 last fall...this is the first time I have used this product and am not sold on it yet. We shall see how it...
This is a photo of a 43 Cabo convertible trim tab. The hydraulic ram has been disconnected to apply the prop speed. My 40 Cabo convertible needs...
Though this subject was a few years ago I did look at my generator exhaust configuration on my 2005 Cabo 40 convertible. The generator exhaust...
Was doing some research on the exterior lights and saw this post. The Pipewelders part numbers will come in handy. Nothing to change at this...
My Cabo 40 will be back at our Florida house at some point in the future - because of the hull design/prop pockets she will fit nicely in the...
The below is a Cabo 40 express with C12 CATs and yes with a fuel gauge on the lower right hand corner of the helm. So there is a Cabo 40...
A comparison to the above 40 Cabo convertible with MAN's. This is the set up on my bridge with my 40 Cabo convertible with CAT C12's. No fuel...
Pulled the drawings out and the fuel gauge sender feeds the CAT box. [ATTACH]
I have a 2005 Cabo 40 convertible with caterpillar C12's. The attached photo is of a Cabo 40 with MAN's showing the fuel gauge repeater on the...
Yes it was a silicone type caulking. It appears as though the port fish box was removed in the past as it came out very easily. After removal I...
Do you know what type of caulking Cabo used at new construction back in 2005? I'm hoping the 18 year old caulking lets go with out too much force.
Thanks for the lessens learned regarding the 40 with the prop pockets. I can see the (4) little screws in each corner and all the caulk. Razor...
How difficult was it to remove the fish boxes? The ones on my 35 Cabo were easy to remove, however the ones on the 40 are installed differently.
Well I just bead blasted my old Cabo/Blue water seals. They cleaned up nice. I may rebuild them with new lip seals and hold on to them. [ATTACH]
I have seen those "Ultra Switches" on many commercial ships I have worked on. Very simple and it looks like they have brackets to hook right onto...
Must have been a design change between 2005 and 2008 hulls switching the discharges from the stern quarters to the transom.
My Cabo 40 has two 2000 GPH Rule bilge pumps on floats and a high water alarm. One discharges to stbd the other to port. Good redundancy and a...
Might bead blast the Cabo seals and they can be a nice paper weight on my desk. I really like the clamping collar on the PSS Pro seals - a good...
